| After-sales Service: | Installation, Commissioning, Technical Training |
|---|---|
| Warranty: | 1 Year |
| Movement Way: | Agitation |
| Flow: | Cross Flow |
| Heating Mode: | Transmission |
| Material Status: | Powder, Bulk |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Food waste, also known as drowning water, food residues, food and kitchen residues, etc. Now people's awareness of environmental protection has increased. The disposal of food waste has always been a concern for people. The content of organic matter in food waste is high, about more than 95% of dry matter. It is easy to corrupting and stinking, and breed bacteria, causing the disease to spread. Especially in the summer, secondary pollution can easily occur during collection and transportation. However, in addition to the high content of organic matter in food and kitchen waste, it is also rich in protein, nitrogen, phosphorus, potassium, calcium, and various trace elements. It has the characteristics of complete nutrition elements and high recycling value. Jiutian food waste drying plant use of food waste as a comprehensive utilization of resources not only avoids the resources waste but also makes the resources reused and turns waste into treasure.
Material Flow: the raw material with 75-85% moisture will be sent into the dewatering machine, and then the moisture will be reduced to 60-65%, then feed into the dryer by screw conveyor, concurrent flow drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle, and outer layer), heat exchange is realized between material and hot air medium. The materials that achieve the drying effect move forward fast and are discharged out of the roller. Wet materials that still don't achieve the drying effect couldn't move fast due to self-weight and are dried completely during the controlling route, thus achieving the drying effect. After the whole drying process is completed, materials are discharged by a screw conveyor. The final moisture will be reduced to 14-18% (can be adjusted according to the buyer's requirement). there is a special device inside the dryer, can prevent the unequal drying of materials.
Air Flow: through the hot blast stove and air blower inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850ºC, then it is inhaled by the dryer-induced draft fan to dry material and evaporate water. When the temperature decreases to 55-60ºC, it is discharged out of the dryer. Wet air containing dust is discharged on standard through dust remover purifying.
Three main paths for the comprehensive utilization of food waste
1. Make the kitchen waste as protein feed. The food waste through sorted, impurities are removed, crushed, dehydrated, deoiled, and oil recovered, biomass diesel is produced, and yeast, probiotics, and auxiliary materials are added. After aerobic fermentation, drying, cooling, packaging, wastewater, and waste gas pass through to meet the discharge standards, the final product is protein feed and biomass diesel.
2. Process kitchen waste as organic fertilizer. Food waste is sorted, impurities are removed, and crushed, dehydrated, deoiled, oil is recovered. To produce the biomass diesel, it needs to add yeast, enzyme preparations, and auxiliary materials. After aerobic fermentation, drying, cooling, packaging, wastewater, and waste gas process to reach the discharge standards, the final product is an organic fertilizer and biomass diesel.
3. Use kitchen waste to produce biogas. After the sorting of kitchen garbage, impurities removed, crushed, deoiled, and oil recovered, and adds anaerobic bacteria. In the sealed tanks, anaerobic fermentation is used to produce biogas for power generation or combustion, and waste residues are dehydrated, drying, cooling, and packaged, and the wastewater is treated and discharged up to standard. The final products are biogas, organic fertilizer, and biomass diesel.
1.Smart control & One-step operation. The operation parameters are under automatic control to ensure the best running condition and moisture stability of dry materials.
2.Impurities self-removal. Iron dust and other impurities are cleaned and would not enter the following process.
3. The insulation effect of the drum is as high as 70% (35% for the traditional product), raising the heat efficiency by 30%.
4.Four-wheel drive, stable, and reliable.
5. Save 50% space and civil investment compared to traditional dryers.
6.Innovative flight design. An efficient flight combination would bring better process control, thermal distribution, and heat efficiency. The temperature of exhaust gas is lower than 50ºC.
7.Convenient variable frequency control systems. Customers could change the material flow rate and product moisture based on their needs.
8.Environmental and safe. Modular configuration of dust collection and purification systems.
9.More choice for innovative air furnaces with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.
| Model | Processing Capacity(t/d) | Output(t/d) | Water Evaporation Capacity (t/h) | Initial Moisture(%) | Final Moisture(%) | Drying Temperature | Total Power (kw) | Total Weight(kg) | Plant Area (m²) |
|---|---|---|---|---|---|---|---|---|---|
| JTJG1208 | 33.6 | 15.6 | 0.75 | 60±5% | 12-15% | 350-550ºC | 32 | 15000 | 5m*14m |
| JTJG1408 | 40.8 | 19.2 | 0.90 | 40 | 17000 | 5m*14m | |||
| JTJG1610 | 58.9 | 27.7 | 1.30 | 55 | 21500 | 6m*16m | |||
| JTJG2010/3 | 131.4 | 61.8 | 2.90 | 95 | 26500 | 8m*16m | |||
| JTJG2210/3 | 145.0 | 68.2 | 3.20 | 100 | 28500 | 8m*16m | |||
| JTJG2510/3 | 167.7 | 78.9 | 3.70 | 125 | 37000 | 10m*16m | |||
| JTJG2512/3 | 204.0 | 96.0 | 4.50 | 145 | 41000 | 10m*18m | |||
| JTJG2912/3 | 247.0 | 116.2 | 5.45 | 165 | 45500 | 10m*20m |
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of drying machine products such as dregs, biomass, organic fertilizer, sludge, yeast, coconut fiber and chaff, and coconut. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}