Coal Steam Type Rotary Dryer
Product Introduction
Conduct oil heat (steam) drying drum dryer belongs to indirect heating mode, the heat conduction oil or steam drying heat, this type of dryer has a low energy consumption of drying, the safety drying process, the material is not affected by heat source pollution, etc., which are widely used in the biomass, food, feed, fertilizer, bad slag chemical industry, medicine, coal, mining, and other small particles or weakly caking dry powder material.
Product Features
1. With the single rotary drum dryer of high mechanization degree, which resistance to overload ability, large processing capacity, it can be the characteristics of continuous operation;
2. Heating 300 ºC conduction oil (or steam) in the dryer after heat exchange, low-temperature heat conduction oil (condensate water) back into the heat conduction oil furnace (steam boiler) through reheating, with circulation use, and make full use of heat and no loss, drying energy consumption is lower than common dryers of 20-40%;
3. The heat conduction oil (steam) drying drum dryer belongs to indirect heating mode, do not contact directly material and heat source, drying process with the closed operation, the material after drying is clean without any pollution;
4. 110-250 ºC drying process temperature can adjust according to the material properties, which can be used in a downstream drying process, it also can use counter-flow drying process, which belongs to the low temperature, constant temperature drying, which the material drying process is more secure;
5. Good structure and simple operation, the material through the cylinder with small resistance, smooth running, and easy operation.
6.Wide application range and good uniformity of product drying.
Working Principle
Heat conduction oil steam drum dryer, mainly composed of tube type heat exchanger, heat sources in and out the center pipe, rotary drum, feeding and discharger of the machine, induced draft fan, dust collector, and distribution cabinets. Wet material enters into the dryer, uniformly distributed in the roller feed plate and the column tube turning, with full contact with hot conduction oil (steam) tube type heat exchanger, realizing heat transfer, mass transfer (110-250 ºC), constant temperature drying, water vaporization and scattered with the air emissions, gradually reduce the moisture from the material, the material has finished the drying process.
Technical Specifications
Model |
Capacity(T/D) |
Initial moisture(%) |
Final moisture(%) |
Total Power(kw) |
Covering area(m²) |
JTMG1916 |
300 |
30-60 |
17±5 |
120 |
8*26 |
JTMG2218 |
500 |
30-60 |
17±5 |
160 |
10*35 |
JTMG2520 |
700 |
30-60 |
17±5 |
200 |
10*40 |
JTMG2820 |
1000 |
30-60 |
17±5 |
290 |
12*40 |
JTMG3430 |
1500 |
30-60 |
17±5 |
420 |
15*46 |
JTMG4032 |
2000 |
30-60 |
17±5 |
500 |
15*50 |
Note: the capacity of the equipment is directly related to the reduction of the water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Jiutian company. |
Package & Delivery
Our Company
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of drying machines such as coal slime dryer, dregs dryer, biomass dryer, organic fertilizer dryer, sludge dryer, yeast dryer, coconut fiber, and chaff dryer. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
FAQ
Q: What is your Business Model? Trading company or factory?
A: We are a 15 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.
Q: What is the Quality of your products?
A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.
Q: How long is the Warranty of your equipment?
A: Our warranty period is one year generally.