| Structure: | Screw |
|---|---|
| Filter Material: | Stainless Steel |
| Pressure: | Mechanical Pressure |
| Capacity (T/D): | 40-200 |
| Power(Kw): | 7.5-30 |
| Speed Range Range(R/Min): | 125-1250 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier The forage dewatering machine is widely used to press materials, such as forage, elephant grass, alfalfa, straw, food kitchen waste, DDGS, etc. It pressed by screw, through different directions, screw press liquid separate from solid.
Thickening: When the shaft is driven by the screw, moving rings around the shaft move up and down relatively. Most water is pressed out from the thickening zone and falls down to the filtrate tank for gravity.
Dewatering: The thickened material moves forward continuously from the thickening zone towards the dewatering zone. With the pitch of the screw shaft thread getting narrower and narrower, the pressure in the filter chamber increases higher and higher. In addition to the pressure generated by the back-pressure plate, the material is greatly pressed.
Self-cleaning: The moving rings rotate continuously up and down under the pushing of the running screw shaft while the gaps between the fixed rings and moving rings are cleaned to prevent clogging that happens frequently for traditional dewatering equipment.
1. The purpose of press separation is realized by the effective coordination of screw and sieve, the water goes well;
2. Successfully solved the problem of screen blockage. The core technology is the cooperation between the screw and the screen to realize the self-cleaning function of the screen, and the interaction between the screw and the special device to agitate the material, the first is to avoid the material holding shaft, the second is to realize the material particles rub off the plug of the screen in the process of screw advancing;
3. Adopt a pneumatic device with a very low maintenance cost, after setting a certain pressing pressure, the device will automatically control the pressing force of materials.especially suitable for assembly line operation, avoid the disadvantages of the common press need to be centralized treatment;
4. The special Angle design of the feeding box can effectively prevent the phenomenon of "bridging" of some sticky materials;
5. press screen is all two half screen, can be easily separated and thoroughly cleaned;
6. beautiful shape, simple structure, low-speed transmission, high torque output, low noise, no vibration, at the same time, the driven parts are few, the wearing parts needed to be replaced are also few, low maintenance costs.
| Model | JTLXT250 | JTLXT300 | JTLXT350 | JTLXT400 | JTLXT450 | JTLXT500 |
| Power(kW) | 7.5 | 11 | 15 | 18.5 | 22 | 30 |
| Speed range (r/min) | 125-1250 | |||||
| Weight(t) | 0.75 | 1.1 | 1.5 | 2.0 | 3.5 | 5.0 |
| Processing capacity(t/d) | 40 | 70 | 90 | 120 | 160 | 200 |
| Floor area(m²) | 2.1 | 2.1 | 2.1 | 5.04 | 5.04 | 5.04 |
Pre-sale
1. According to your needs, then select the right model for you.
2. According to your special requirements, design customized solutions, and manufacture customized products for you.
3. Welcome to your visit.
Sale
1. Sign the contract, pay a deposit, we arrange the production.
2. Product acceptance.
3. Help you formulate a construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust the device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you on-site production until achieving customer satisfaction.
Packages & Shipping
1. All machines, which are less than a full container, are packed by the standard wooden case for exporting. So it is safe and strong enough for a long journey from our factory to your place.
2. If all the machines are shipped by a full container, the container will be loaded in our factory by our workers. Also, all the machines will be fixed onto the container.
3. The machine will be sent to you by sea, by air or even by International courier service.
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine.
Jiutian Machinery products include belt drying machine, flash drying machine, biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.
If you are interested in our products, or if you have any questions, please feel free to contact us, we will give you a reply within 24 hours!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}