Professional Complete Kaoline Bentonite Rotary Dryers Gypsum Powder Dryer for Sale

Product Description

 

Product Description

 <sup>The bentonite dryer is mainly used for the drying of various types of clay mud such as bentonite, kaolin, aluminum, and iron clay, and solves some problems of sticking, crushing, and drying. Dingli Group successfully launched the bentonite dryer according to this development direction.

The bentonite dryer can adapt to various fuels such as coal, oil, gas, etc. At present, the fluidized boiler is favored by users due to its convenient operation, energy saving, environmental protection, and easy purchase of raw materials. Some manufacturers also choose natural gas or coal gas generators for conversion, and the gas is burned for a second time to achieve the drying effect. It conforms to the country's policy of creating an environment-friendly and resource-saving society and is an environmentally friendly and energy-saving product that replaces traditional drying equipment.</sup>

Applications

^{Suitable for the drying of various types of clays such as bentonite, kaolin, aluminum-iron clay, etc., widely used in cement, mining, slag, clay and other industries.}

 

Working Principle

^{The working principle of this set of equipment is as follows: After the wet slag enters the drying drum, it is divided into the following working areas: one is the guide area. The wet slag enters this area and quickly evaporates water in contact with the high temperature hot air. When the slag falls, it will be led to the next working area; the second is the pick-up cleaning area, where the wet material is picked up by the pick-up board to form a material curtain. When the slag falls, it is easy to form a phenomenon of adhesion to the drum wall. Because the equipment is designed with a cleaning device, the cleaning device can clean the slag adhering to the inner wall very reasonably. In this process, the cleaning device also breaks the agglomeration of the slag ball, thereby increasing the heat exchange area and increasing the drying rate. ; The third is the inclined lifting plate area, where the wet slag has been in a low-moisture and loose state, and the slag has no adhesion phenomenon in this area. After sufficient heat exchange, the slag reaches the required moisture state and enters the discharge area; The fourth is the discharging area, where the drum is not equipped with a copy plate, and the slag rolls and slides to the discharge port in this area to complete the entire drying process.}

Heat Source

<sup>Steam waste heat heating: equipped with automatic chain exhaust furnace, high and low coal injection furnace, and other coal-fired hot blast stoves, the cost of coal-fired drying is low, but the pollution of coal-fired is serious. Therefore, in addition to improving the heating efficiency of coal-fired hot blast stoves and tumble drying In addition to the utilization rate of machine heat, the dust removal and purification system is equipped with dry secondary dust removal, dry and wet secondary dust removal, dry and wet multi-stage dust removal and other dust removal equipment, so as to ensure that the coal-fired drying equipment passes the EIA;

Gas and oil heating: mainly use the waste heat of boiler plants, power plants, steam, or heat transfer oil, etc., through the tube reformer to technically process the steam to meet the drying heat and temperature requirements, and the steam temperature is required to be above 110 degrees You can;

Coal-fired heat supply: natural gas burners, gas generators, fuel-fired engines, etc., build combustion chambers, with sufficient heat supply, sufficient combustion, and greater optimization of fuel consumption.</sup>

 

Product Parameters

^Model	^Capacity(T/D)	^Initial moisture(%)	^Final moisture(%)	^Total Power(kw)	^Covering area(m²)
^JTMG1916	^300	^20-30	^<5<>	^130	^42*16
^JTMG2220	^500			^150	^46*16
^JTMG2522	^800			^200	^48*16
^JTMG2825	^1000			^250	^51*16
^JTMG3026	^1300			^280	^52*18
^JTMG3228	^1500			^330	^55*18
^JTMG3430	^1800			^380	^56*18
^JTMG3632	^2200			^450	^58*18
^JTMG3835	^2700			^560	^60*18
^JTMG4036	^3000			^660	^60*18
^Note: the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Dingli company.

Packaging & Shipping

^{Your equipment will be well packed in containers to meet long-distance transportation.}

 

Company Profile

^{Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productivity, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.}

^{At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.}

FAQ

 

<sup>Q1. Quality control

All the sand drying equipment offered by Zhengzhou Jiutian Technology Machinery Co., Ltd. is produced by China's national standard drawings, nonstandard equipment will be produced by the drawings confirmed by clients. Zhengzhou Jiutian strictly follows ISO9001, the SGS Quality management system. Most equipment will be tested for at least 8 hours in the factory before delivery. There is a record in the computer for each piece of equipment, spares can be easily confirmed when it is necessary.

Q2. Way of payment

Zhengzhou Jiutian offers various ways of payment, T/T, L/C, West Union, etc. All can be negotiated.

Q3. Delivery time

Normal delivery time within 45 days, complete production line, or larger equipment may take longer. The exact delivery shall be confirmed when placing the order.

Q4. Shipping lines

Priority rules based on clients' requests, and freight cost, service, shipping date, and date of arrival shall be considered.

Q5. Installation

Jiutian has several experienced technicians with passports ready to go for installation when installation service is needed.

Q6. Equipment warranty

The sand drying equipment from Zhengzhou Jiutian Technology Machinery Co., Ltd. with 12 month warranty.

Q7. What is the heat source of your stove?

Coal, wood, rice husk, diesel, or natural gas. And our company is developing a gas stove.</sup>