| Customization: | Available |
|---|---|
| Movement Way: | Agitation |
| Atomization: | Gas Atomization |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The flash dryer is widely used in the dispersion and drying of granular, powdery, paste-like, and filter cake-like false agglomerates in the chemical, pharmaceutical, building materials, food, feed, and other industries. The flash dryer has the advantages of the small occupied areas, low energy consumption, high thermal efficiency, and continuous mass production. The flash dryer body is provided with a rotary cutting device, and the dry material is subjected to shearing, rotating, collision, friction, etc., so that the material is pulverized and refined, and is highly dispersed, thereby achieving the effect of efficiency and rapidly evaporating water. The dryer is equipped with an air filter to achieve the cleanliness of the hot air and to provide production conditions for the hygiene requirements of the food industry. The machine sets the cyclone separation and collecting materials. In addition, the bag dust removal receipt is added to increase the material recovery rate. It can improve the economic efficiency of enterprises. The dryer can be customized according to user needs.
The flash dryer consists of a dry main engine, feeder, heat source device (hot air furnace or steam), air filter, air blower, cyclone separator, bag filter, and induced draft fan. The hot air tangentially enters the bottom of the dryer and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer by the screw feeder. Under the strong action of the high-speed rotating stirring paddle, the material is dispersed under the action of impact, friction, and shearing force, the block material is rapidly pulverized, and it is fully contacted with hot air and heated, and dry. The dehydrated dry material rises with the hot gas flow, and the classification ring intercepts the large particles. The small particles are discharged from the center of the ring to the outside of the dryer and are recovered by the cyclone separator and the dust collector. The dry material is not dried or the bulk material is subjected to centrifugal force, fell to the bottom, and was crushed and dried.
1. The organic combination of swirling, fluidizing, spraying and pulverizing, and grading techniques.
2. Compact equipment, small size, high production efficiency, continuous production, and realize "small equipment, large production".
3. Large drying strength, low energy consumption, and high thermal efficiency.
4. The material has short residence time and well-finished product quality, which can be used for drying heat-sensitive materials. Negative pressure or micro-negative
5. Pressure operation, good airtightness, high efficiency, and elimination of environmental pollution.
Feed System
The feed system consists of a feed vat where a discontinuous flow of product is buffered and fragmented by an agitator prior to continuous drying. A variable speed feed screw (or pump in the case of fluid feed) forwards the product to the drying chamber.
Drying Chamber
The rotor at the conical base of the drying chamber fluidizes product particles in a drying-efficient hot air flow pattern in which any wet lumps are rapidly disintegrated. Hot air is supplied by a temperature-controlled air heater and speed-controlled fan, entering the drying chamber at a tangent in order to establish a turbulent, whirling airflow.
Airborne, fine particles pass through a classifier at the top of the drying chamber, while larger particles remain in the air flow for further drying and powdering.
The drying chamber is rigidly designed to withstand pressure shock in the event of explosive combustion of flammable particles. All bearings are effectively protected against dust and heat.
Bag Filter
Powder from the drying chamber is collected in a bag filter, while the outlet air leaves the system at the top via a suction fan.
Foodstuffs: soy protein, gelatinized starch, wine trough, wheat sugar, wheat starch, etc.
Organics: Atrazine (pesticide pesticides), lauric acid, benzoic acid, benzoic acid, bactericidal dan, sodium oxalate, cellulose acetate, organic pigments, and the like.
Dyes: antimony, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various nitrogen dye intermediate.
Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, and the like.
| Model | Inner Diameter(mm) | Air Volume(m³/h) | Evaporation Capacity(kg/h) | Total Power(kw) | Max Height(m) | Covering Area (m²) |
| XSG-2 | 200 | 350-500 | 12-17 | 10 | 4 | 15 |
| XSG-4 | 400 | 1150-2000 | 40-70 | 20 | 4.8 | 20 |
| XSG-6 | 600 | 2450-4500 | 80-150 | 40 | 5.8 | 28 |
| XSG-8 | 800 | 4450-7550 | 150-250 | 65 | 6.5 | 35 |
| XSG-10 | 1000 | 7000-12500 | 230-425 | 85 | 7.1 | 40 |
| XSG-12 | 1200 | 10000-20000 | 300-600 | 105 | 7.8 | 52 |
| XSG-16 | 1600 | 18000-36000 | 600-1000 | 150 | 8.8 | 80 |
| XSG-20 | 2000 | 28200-56500 | 1000-1500 | 230 | 10.1 | 150 |
The Spin Flash Dryer ordered by Jiangsu customers applies Jiutian's newly developed drying technology. At the same time, it combines the characteristics of okara with special equipment to dry the okara to the customer's demand.
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine.
Our products include:
){kind=link}