Environmentally Friendly Sugarbeet Pulp Beet Residue Rotary Drum Drying Machine Price

Product Description

 

Beet Pulp Rotary Dryer

Product Description

The sugar beet pulp dryer is specifically designed according to the problems of the traditional rotary dryer which is not suitable for high-moisture materials where MC is higher than 50% and the viscosity is relatively low. Meanwhile, since the 'black hole' phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption, the paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing and separating function. The crushing effect enlarges the contact surface of particles, which largely increases the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of a paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of a traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%.

The sugar beet pulp drying production line is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sugar beet pulp, sludge, bean dregs, starch residue, and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces. We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level, and site condition.

Working Principle

Material flow: 75-85% moisture content material first with special dehydration machine removing a part of moisture, the moisture removed around 68%, then send into the dryer by screw conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly and move in a spiral forward method. Inside mixing blade device will be fully stirred and crushed material, material, and hot air through full heat exchange, the rapid evaporation of water vaporization, reaching about 35%, discharged by the screw conveyor, then send into the semi-wet material crusher, crushed material size below 1mm, then into pulse air-drying process, within 10-15s the material quickly removed to 14% by the cyclone discharger and Pulse bag dust collector recovery dry powder, exhaust emissions amount to the national standard requirement, to complete the entire drying process. A drum cleaning device is installed inside the drum to prevent the material from adhering to the cylinder wall.

Air Flow: The air through the hot blast stove fan inflating, the air enters the hot blast stove for combustion heating. Its temperature reaches up to 600-850ºC, then it is inhaled by the dryer induced draft fan absorbed to dry material and evaporate water. Through the heat exchange drying the material. When the temperature decreases to 55-85ºC, it is discharged out of the dryer. Wet dust is discharged on standard through the cyclone and the pulse dust collector purifying and emission.

Product Parameters

Model(JTZG)	1208	1408	1610	2010/3	2210/3	2510/3	2512/3	2912/3
Input Capacity(t/d)	43.7	52.5	75.8	169	186.5	215.5	262.2	317.6
Output Capacity(t/d)	25.7	30.9	44.6	99.4	109.7	126.7	154.2	186.8
Vaporization(t/h)	0.75	0.9	1.3	2.9	3.2	3.7	4.5	5.45
Early Moisture(%)	85±5%
Final Moisture(%)	10%
Drying Temperature(ºC)	400±50ºC
Total Power(kw)	55	75	95	140	170	210	260	300
Total Weight(t)	22	27	28.5	33.5	45	60	80
Plant Area(m)	5*20	5*20	6*22	8*25	8*25	10*28	10*30	10*30
Except for the above models, we can also supply special models according to your requirements.

Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.

Product Features

 

1. Can achieve intelligent control, one-button operation, automatic adjustment of operating parameters, the dryer is always in the best condition to run, to ensure that the drying of the material moisture uniform and stable, bright colors, nutrients remain unchanged.
2. Built-in mixing blade device will be fully stirred and broken material, material, and hot temperament heat exchange fully, the equipment unit capacity increased by 50 %, fuel energy consumption reduced by 30% ;
3. Equipment with less malfunction, low maintenance costs, low energy consumption;
4. Drying products are powder, water evenly, bright color, drying process does not lose the material nutrients;
5. Starch residue drying production line using a special scattering and crushing device to ensure a good dryer drying effect.
6. Adopts a unique sealed insulation device, effectively reducing the heat loss of the drying system;
7. The system sealing performance is good, and with a complete dust removal device, no dust spill, the operating environment is good;
8. The entire drying system using electrical centralized control, hot air temperature with automatic adjustment, a high degree of automation, easy to operate;
9. After the drying process, it can be equipped with crushing, mixing, granulation, packing, and other follow-up section to produce potato residue pellet feed products.

Company Profile

Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.

At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.

FAQ

Q: What is your Business Model? Trading company or factory?

A: We are a 20 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.

Q: Can I visit your factory?

A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.

Q: What is the Quality of your products?

A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.

Q: How long is the Warranty of your equipment?

A: Our warranty period is one year generally.