| Customization: | Available |
|---|---|
| Movement Way: | Agitation |
| Flow: | Cross Flow |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Bean dregs, the by-product of producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs' water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs' crude protein content is three times higher than that of unhulled rice. It is suitable for nutrition feed for pigs, chickens, ducks, etc.
Material Flow: 75-85% moisture content material first with special dehydration machine removing a part of moisture, the moisture removed around 68%, then send into the dryer by screw conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in a spiral forward method. Inside mixing blade device will be fully stirred and crushed material, material, and hot air through full heat exchange, the rapid evaporation of water vaporization, reaching about 35%, discharged by the screw conveyor, then send into the semi-wet material crusher, the crushed material size below 1mm, then into pulse air-drying process, within 10-15s the material quickly removed to 10% by the cyclone discharger and Pulse bag dust collector recovery dry powder, exhaust emissions amount to the national standard requirement, to complete the entire drying process. A drum cleaning device is installed inside the drum to prevent the material from adhering to the cylinder wall.
Air Flow: The air through the hot blast stove fan inflating, the air enters the hot blast stove for combustion heating. Its temperature reaches up to 600-850ºC, then it is inhaled by the dryer induced draft fan absorbed to dry material and evaporate water. Through the heat exchange drying the material. When the temperature decreases to 55-85ºC, it is discharged out of the dryer. Wet dust is discharged on standard through the cyclone and the pulse dust collector purifying and emission.
Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet. After a certain degree of dehydration and scattering, wet bean dregs enter the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contact with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by an air-inducing device, which avoids material from being wet again.
Widely used for drying bean dregs, brewer grains, potato residue, sweet potato dregs, cassava pulp, tapioca slag, etc.
1. Smart control & One-step operation. The operation parameters are under automatic control to ensure the best running condition and moisture stability of dry materials.
2. Impurities self-removal. Iron dust and other impurities are cleaned and would not enter the following process.
| Model(JTJG) | 1208 | 1408 | 1610 | 2010 | 2010/3 | 2210/3 | 2510/3 | 2512/3 |
| Input Capacity(t/h) | 1.82 | 2.18 | 3.15 | 3.81 | 4.76 | 5.51 | 6.33 | 7.60 |
| Output Capacity(t/h) | 1.07 | 1.28 | 1.85 | 2.24 | 2.80 | 3.24 | 3.72 | 4.47 |
| Vaporization(t/h) | 0.75 | 0.9 | 1.30 | 1.57 | 1.96 | 2.27 | 2.61 | 3.13 |
| Early Moisture(%) | 50±5% | |||||||
| Final Moisture(%) | 15%(adjustable) | |||||||
| Drying Temperature(ºC) | 350±30 | |||||||
| Total Power(KW) | 32 | 40 | 55 | 95 | 95 | 100 | 125 | 145 |
| Total Weight(T) | 15 | 17 | 21.5 | 26.5 | 26.5 | 28.5 | 37 | 41 |
| Plant Area(m) | 5*15 | 5*15 | 6*16 | 8*18 | 8*20 | 8*20 | 10*20 | 10*22 |
| Except for the above models, we also supply the special models according to your requirements. | ||||||||
Q: What is your Business Model? Trading company or factory?
A: We are an 18 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.
A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots of countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality.
A: Our warranty period is one year generally.
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of drying machine products such as coal slime, dregs, biomass, organic fertilizer, sludge, yeast, coconut fiber and chaff, and coconut. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
Contact Us
Please feel free to contact us if you are interested, we will give you a reply within 24 hours!
){kind=link}