| Customization: | Available |
|---|---|
| Type: | Flat Die Platen Wheel |
| Voltage: | as Clients′s Requirement to Customize |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Biomass pellets are an economical and sustainable energy source, which is being used more and more globally due to its low cost and low environmental impact.
According to the demand of the market, our technical team designs and manufactures the equipment of biomass pellet production line, which are suitable for the biomass material with the 35-56% moisture to make pellet, such as sawdust, bamboo shavings, wood shavings, barley straw, oat straw, wheat straw, rye straw, rice straw, rice husk, bagasse, sorghum straw, corn straw, beans stalk, peanut vine stalk, etc. From crushing, drying, granulating to cooling, and packaging, Jiutian provides both a separate machine and a complete production line. Provide raw materials and capacity requirements, we can provide you with detailed solutions and special granulation equipment.
Production Process
Raw Materials Preparation
Wood pellets can be made from sawdust, wood shavings, wood chips or wood logs, any forestry waste or straws, etc.
Crushing Process
Crushing machine is used for crushing the larger materials into smaller powder for supporting produce wood pellets. After milled, the output size can reach a diameter of 3-5mm, which is convenient for further processing to get dried and pelletized.
Drying Process
The best moisture content for pelletizing is about 11-17%. So before pelletizing, a drying machine is needed to make the moisture content reaches the required standards.
Wood Pelletizing Process
Pellet mill is a significant part of the wood pellet production line and has reliable and stable performance. You can choose a ring die pellet mill or flat die pellet mill depends on your capacity requirements.
Cooling Process
After the pelletizing process, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. So a cooler must be used to reduce their surface temperature and the moisture content which makes the wood pellet easy to store meanwhile helps screen good and pure pellets.
Packing Process
After the cooling process, the packing process is necessary to protect the wood pellets from the damp. The automatic wood pellet weighing & packing system adopts PLC control with high weighing accuracy and easy operation.
1. Patent technology (patent no. : ZL200920089749.2), single equipment the kinds are variety, application to a variety of materials, modular structures, optimize configurations, ensure production lines broad applicability.
2. According to customer's requirements to realize intelligent control, a key "fool" type operation.
3. More than 300 users in the world, our factory has rich practical experience.
4. The cover area reduces 50% than the traditional drying granulating production line, civil investment reduces about 50%.
5. Waste gas discharge temperature is lower than 50 ºC, low energy consumption.
6. Particle shaping fuel rate of 98%, bulk density, and high density.
7. Special design ash control technology, ash content lower than 1%.
8. Modular dust collecting and purifying heat recycling configuration, safe and protect environmentally.
9. This type of mixing drum dryer is supporting many new types of energy-saving hot air stove, energy consumption drops about 30%, power consumption reduces 20%, lower operation costs.
10. Internet sharing systems can ensure that personalized production lines, accessories, and unit efficient distributions in place.
We can help optimize the drying process according to the property of different materials, production scale, application requirements, cost control, automation level, and site condition.
| Model | Capacity(t/h) | Motor power(kW) | Weight(ton) | Area(m²) |
|---|---|---|---|---|
| JTKL1000 | 0.8-1.0 | 135 | 45 | 10×24m |
| JTKL1500 | 1.2-1.5 | 175 | 47 | 10×24m |
| JTKL2000 | 1.5-2.0 | 210 | 55 | 10×24m |
| JTKL3000 | 2.5-3.0 | 255 | 68 | 12×26m |
| JTKL5000 | 4.5-5.0 | 300 | 73 | 12×26m |
| Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals. | ||||
){kind=link}