New Technology Bentonite Rotary Dryer Machine Plant for Drying Soil, Clay, Kaolin

• Customization: Available
• After-sales Service: Installation, Commissioning, Technical Training
• Warranty: 1 Year
• Model NO.: JT
• Flow: Cross Flow
• Heating Mode: Transmission
• Material Status: Powder, Bulk
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Power: 5.5kw-18.5kw*4
• Capacity: 2-50t/H
• Fly Consumption: 12-4~6-8 Kg/T
• Raw Material: Fly Ash,River Sand,Slag
• Color: Customer′s Request
• Transport Package: Container
• Origin: Henan, China
• HS Code: 8419399090
• Production Capacity: 20 Sets/Month

Product Description

 

Soil Clay Drum Drying Machine

 

Product Description

Industrial rotary dryer can be used for rapid drying of bentonite, kaolin, bauxite, diatomite, peat, bauxite and other mineral and soil wastes. , The production capacity is stable, durable and adaptable. The bentonite dryer can use coal, oil, gas and other fuels for heating. Based on the environmental impact assessment requirements of the customer's project, the technical design can be flexibly designed to meet the needs of environmental impact assessment and continuous production.

 

Applications

Suitable for the drying of various types of clays such as bentonite, kaolin, aluminum-iron clay, etc., widely used in cement, mining, slag, clay and other industries.

 

Heat Source

Steam waste heat heating: equipped with automatic chain exhaust furnace, high and low coal injection furnace, and other coal-fired hot blast stoves, the cost of coal-fired drying is low, but the pollution of coal-fired is serious. Therefore, in addition to improving the heating efficiency of coal-fired hot blast stoves and tumble drying In addition to the utilization rate of machine heat, the dust removal and purification system is equipped with dry secondary dust removal, dry and wet secondary dust removal, dry and wet multi-stage dust removal and other dust removal equipment, so as to ensure that the coal-fired drying equipment passes the EIA;

Gas and oil heating: mainly use the waste heat of boiler plants, power plants, steam, or heat transfer oil, etc., through the tube reformer to technically process the steam to meet the drying heat and temperature requirements, and the steam temperature is required to be above 110 degrees You can;

Coal-fired heat supply: natural gas burners, gas generators, fuel-fired engines, etc., build combustion chambers, with sufficient heat supply, sufficient combustion, and greater optimization of fuel consumption.

Working Principle

The working principle of this set of equipment is as follows: After the wet slag enters the drying drum, it is divided into the following working areas: one is the guide area. The wet slag enters this area and quickly evaporates water in contact with the high temperature hot air. When the slag falls, it will be led to the next working area; the second is the pick-up cleaning area, where the wet material is picked up by the pick-up board to form a material curtain. When the slag falls, it is easy to form a phenomenon of adhesion to the drum wall. Because the equipment is designed with a cleaning device, the cleaning device can clean the slag adhering to the inner wall very reasonably. In this process, the cleaning device also breaks the agglomeration of the slag ball, thereby increasing the heat exchange area and increasing the drying rate. ; The third is the inclined lifting plate area, where the wet slag has been in a low-moisture and loose state, and the slag has no adhesion phenomenon in this area. After sufficient heat exchange, the slag reaches the required moisture state and enters the discharge area; The fourth is the discharging area, where the drum is not equipped with a copy plate, and the slag rolls and slides to the discharge port in this area to complete the entire drying process.

 

 

Product Parameters

Model	Capacity(T/D)	Initial moisture(%)	Final moisture(%)	Total Power(kw)	Covering area(m²)
JTMG1916	300	20-30	<5	130	42*16
JTMG2220	500			150	46*16
JTMG2522	800			200	48*16
JTMG2825	1000			250	51*16
JTMG3026	1300			280	52*18
JTMG3228	1500			330	55*18
JTMG3430	1800			380	56*18
JTMG3632	2200			450	58*18
JTMG3835	2700			560	60*18
JTMG4036	3000			660	60*18
Note: the capacity of equipment is directly related to the reduction of water content of coal. The proportion of precipitation is large, and the production capacity of equipment decreases correspondingly. Specific consulting Dingli company.

 

Packaging & Shipping

Your equipment will be well packed in containers to meet long-distance transportation.

Company Profile

  Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.

  At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.