Efficient Kitchen Waste Treatment Production Machinery Rotary Dryer

Product Description

 

 

Food Waste Rotary Dryer

Product Description

Food waste, also known as drowning water, food residues, food and kitchen residues, etc. Now people's awareness of environmental protection has increased. The disposal of food waste has always been a concern for people. The content of organic matter in food waste is high, about more than 95% of dry matter. It is easy to corrupt and stink, and breed bacteria, causing the disease to spread. Especially in the summer, secondary pollution can easily occur during collection and transportation. However, in addition to the high content of organic matter in food and kitchen waste, it is also rich in protein, nitrogen, phosphorus, potassium, calcium, and various trace elements. It has the characteristics of complete nutrition elements and high recycling value. Jiutian Company's use of food waste as a comprehensive utilization of resources not only avoids resource waste but also makes the resources reused and turns waste into treasure.

There are three main paths for comprehensive utilization of kitchen waste resources. The first is protein feed made from kitchen waste. The kitchen waste is sorted, removes impurities, crushes, dehydrates, deoils, recovers oil, produces biomass diesel, and then adds yeast, probiotics and auxiliary materials, undergoes aerobic fermentation, drying, cooling, packaging, and waste water and waste gas pass through. The final products are protein feed and biomass diesel after treatment of up-to-standard emissions; the second is organic fertilizer made from kitchen waste. The kitchen waste is sorted, removes impurities, crushes, dehydrates, deoils, recovers oil, produces biomass diesel, and then adds yeast, enzyme preparations and auxiliary materials, undergoes aerobic fermentation, drying, cooling, packaging, and waste water and waste gas pass through The final products are organic fertilizer and biomass diesel; the third is to make biogas from kitchen waste. The kitchen waste is sorted to remove impurities, pulverize, deoil, recover oil, and then add anaerobic bacteria material. In a sealed tank, anaerobic fermentation is performed to produce biogas, which is used for power generation or combustion. The waste residue is dehydrated, Organic fertilizers are produced by drying, cooling and packaging. The wastewater is treated and discharged up to the standard. The final products are biogas, organic fertilizers and biomass diesel.

Project Feature

 

(1) Food waste treatment equipment innovation: The process of food waste to regenerate protein feed, regenerating fats, fermented biological feed, and organic fertilizer, which is based on the economic value of food waste. In the same production line, through the physical, Comprehensive technical classification, extraction and processing of machinery, biology, and other products with different economic values such as protein feeds, oils and fats, fermented biological feeds, biogas, and organic fertilizers, which is high economic efficiency, using the new ideas and processes of food waste to developing the new resources.

(2) Kitchen waste treatment equipment innovation: There are many sundries in the food waste, the components are complex and unstable, and the oil content is high. Therefore, the key equipment in the complete set of equipment is the special equipment after the innovation and transformation. The complete set of equipment is fully sealed and automatically system and the central program control system. It realizes the continuous, automated, and large-scale reprocessing and utilization of food waste.

(3) Renewed product innovation: The food and kitchen waste need to classification and extraction, and the simultaneous production of protein feeds, oils, fermented biological feeds, fermented organic fertilizers, biogas, etc. Now it is international mainstream. The protein content is 32-37% in renewable protein feed. Regenerative fat is a chemical raw material. Regeneration of fermented biological feed is made by changing the feed filling material to make various new types of feed, regenerating fermented organic fertilizer, nitrogen, phosphorus and potassium, and rich in plant nutritive elements. Anaerobic fermentation to produce the biogas, a full-depth use of food waste nutrients, this kitchen waste resources can be 100% recycling.

Working Principle

Material Flow: the raw material with 75-85% moisture will be sent into the dewatering machine, and then the moisture will be reduced to 60-65%, then feed into the dryer by screw conveyor, concurrent flow drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle, and outer layer), heat exchange is realized between material and hot air medium. The materials that achieve the drying effect move forward fast and are discharged out of the roller. Wet materials that still don't achieve the drying effect couldn't move fast due to self-weight and are dried completely during the controlling route, thus achieving the drying effect. After the whole drying process is completed, materials are discharged by a screw conveyor. The final moisture will be reduced to 14-18% (can be adjusted according to the buyer's requirement). there is a special device inside the dryer, that can prevent the unequal drying of materials.
Air Flow: through the hot blast stove and air blower inflating, the air enters the hot blast stove for combustion heating. Its temperature reaches up to 600-850ºC, then it is inhaled by the dryer-induced draft fan to dry material and evaporate water. When the temperature decreases to 55-60ºC, it is discharged out of the dryer. Wet air containing dust is discharged on standard through dust remover purifying.

Applications

Widely used for drying food waste, including dining table waste, kitchen waste, etc.

Product Features

1. Sealed material operation: It can be composed of the different functions of the complete set of equipment, the material transport are all carried out in a fully closed state between the conveyer equipment, preventing secondary pollution and reducing the smell spill process, and the slag leaks out and reduced noise emitted inside.
2. Continuous process flow: The complete set of equipment from the food waste to the bagging of recycled products, which is a continuous production line, and the materials are operated in a closed room.
3. Automation of production operations: All of the various function equipment can be coordinated and cooperated in the central control cabinet.
4. Programmable system control: The central control cabinet is provided. The process of completing the functions of the various equipment of the production line and the work coordination process between them are stored in the computer that is already programmed. Human manual operation can be also used to guide individual devices' operation, but the manual operation is also controlled by a programmed computer.
5. Zero emission and environmental protection: All the available materials including liquid waste can be completely recycled and reused, except for the solid waste and delivered by garbage trucks.

Product Parameters

 

Specification	JTCG2006/3	JTCG2008/3	JTCG2010/3	JTCG2012/3	JTCG2212/3	JTCG2512/3
Input Capacity(t/day)	76.93	105.19	133.45	161.71	183.05	204.72
Output(t/h)	1.08-0.27	1.48-0.37	1.88-0.46	2.57-0.64	2.92-0.72	3.26-0.81
Evaporation Capacity(t/h)	0.61	0.84	1.06	1.45	1.65	1.84
Raw Material Moisture(%)	45-75%
Dried Material Moisture(%)	14-18% (Adjustable)
Drying temperature(ºC)	280±30ºC (Average temperature)
Total Power(kW)	28-35	45-66	56-78	60-82	65-85	90-125
Total Weight(kg)	19500	22000	24000	25500	27000	38000
Area	8m*12m	8m*15m	8m*18m	8m*20m	8m*20m	10m*20m
Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.

 

Company Profile

Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productivity, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.

At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.

FAQ

Q: What is your Business Model? Trading company or factory?

A: We are an 18 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.

Q: Can I visit your factory?

A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.

Q: What is the Quality of your products?

A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots of countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality.

Q: How long is the Warranty of your equipment?

A: Our warranty period is one year generally.