| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sand dryer is also known as the three layers of drum dryer, three return cylinder dryer, based on the single-cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by our company, with mature technology, through the drying of the sand, fly ash, coal, mineral materials, slag, and other material, the effect is very good.
The sand is conveyed to silo by belt conveyor or bucket elevator and transported to the feed end by the feeder of the silo .The inclination of the feeding pipeline should exceed the natural inclination of materials to facilitate sand flowing into the dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. To feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder runs, the sand is carried to the lower side by gravity. In the process of moving forward, the wet raw material is roasted by the heat directly or indirectly to make the raw material dry quickly, the final products discharge out by a belt conveyor or screw conveyor. There is a shoveling plate installed in the dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material run quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use a bag-type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.
1. The sand dryer is made of alloy steel plate manufacturing,the wear-resisting 3-4 times of ordinary steel , the service life of the equipment is more than 10 years.
2. Material initial moisture content 15%, final moisture to ensure below 0.5-1%,which is the preferred products of the cement plant, GGBS and dry mortar production line.
3. The sand dryer thermal efficiency is as high as 80%, at the same time, the total power is low, 40% energy saving.
4. The fuel can be adapted to the coal, oil, gas,it can be dried under 20-40mm particles material, aggregate, powder material.
5. The sand dryer covers an area of about 40% lower than single drum dryer and civil investment reduced by about 50%.
6. No air leakage phenomenon, solved the sealing difficulties, modular units, installation is convenient.
7. The discharge temperature is < 50 ºC,which can be directly feed libraries, without cooling.
Application: Widely used for drying river sand, fly ash, slag, mineral residue, etc.
| Fly Ash Dryer | |||||
| Model(m) | Capacity(t/h) | Fly consumption(kg/t) drying materials | Total power (kw) | ||
| River Sand | Fly Ash | Slag | |||
| Φ2.0×2 | 4-5 | 2-3 | 3-5 | 12-14 | 5*5 |
| Φ2.0×4 | 8-12 | 4-6 | 8-10 | 12-14 | 3*2 |
| Φ2.0×5 | 12-15 | 6-7 | 10-13 | 10-12 | 4*2 |
| Φ2.2×4.5 | 14-18 | 7-9 | 12-15 | 10-12 | 5.5*2 |
| Φ2.5×6 | 23-28 | 10-13 | 20-22 | 10-12 | 5.5*4 |
| Φ2.8×6 | 30-35 | 15-18 | 25-30 | 10-12 | 5.5*4 |
| Φ3.0×6 | 35-40 | 18-20 | 32-35 | 8-10 | 7.5*4 |
| Φ3.0×7 | 40-45 | 20-25 | 35-40 | 8-10 | 7.5*4 |
| Φ3.2×7 | 45-50 | 25-30 | 40-45 | 8-10 | 11*4 |
| Φ3.2×8 | 50-55 | 30-35 | 45-50 | 8-10 | 11*4 |
| Φ3.6×8 | 60-70 | 35-40 | 60-65 | 6-8 | 15*4 |
| Φ3.8×9 | 70-80 | 40-45 | 70-75 | 6-8 | 15*4 |
| Φ4.0×10 | 90-100 | 45-50 | 80-90 | 6-8 | 18.5*4 |
| Φ4.2×8.5 | 80-100 | 45-60 | 80-90 | 6-8 | 18.5*4 |
| Capacity depend on the raw material moisture is 15%,and after drying moisture is 1-3% | |||||
Zhengzhou Jiutian Machinery Equipment Co., Ltd. is a comprehensive scientific and technological innovation private enterprise integrating scientific research, development, production, sales, and service. Our company is committed to the research and development and production of a series of technical products such as biomass pellet fuel production line, feed dehydration drying equipment, kitchen waste treatment equipment, coal (mud) upgrading equipment, etc. It involves the optimization of treatment projects for the reuse of kitchen waste, the recycling of resources in the field of the circular economy, clean energy, and environmental protection projects, the conversion of waste by-products such as waste residue and waste yeast into feed projects, coal chemical industry such as coal slime and coal mine. The coal refining by-products are transformed into power plant combustion raw materials projects and the recycling of wood chips and sawdust resources into biomass energy projects.
Our products include:
){kind=link}