| Customization: | Available |
|---|---|
| After-sales Service: | Installation, Commissioning, Technical Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Bagasse Dryer Machine Product Introduction
The bagasse dryer is used for drying sugar cane bagasse to make pellet fuels or powder feeds. Bagasse dryer mainly consists of a heater, feeding machine, rotary drum, discharging machine, induced draft fan, unloading feeder, cyclone, and power distribution cabinet form. 
Bagasse dryer can be used in food, feed, fertilizer, chemical, pharmaceutical, mining industries. According to the different requirements about the dryer. We have different heat sources. For example, direct heating model hot blast stove, indirect hot blast stove, heat conduction oil, electric heating, steam, etc. This dryer is suitable for drying the material with moisture less than 65%.
Energy saving and environmental protection
The current bagasse dryer has done a good job in environmental protection and low consumption, and manufacturers pay more attention to environmental protection technology, which is also an inevitable requirement of my country's current economic development. Zhengzhou Jiutian Machinery adopts secondary dust removal device, namely double cyclone dust collector and bag filter, with dust removal efficiency as high as 99.9%. At the same time, the technical upgrading of heat utilization and heating technology has been strengthened to achieve a better drying state.
Bagasse Drying Equipment Working Principle
The material enters the inner layer of the rotary drum from the feeding device to realize downstream drying. The material is continuously picked up and scattered under the copying plate of the inner layer in a spiral manner to realize heat exchange, and the material moves to the other end of the inner layer and enters the middle layer. For countercurrent drying, the material is continuously and repeatedly raised in the middle layer, in a way of advancing two steps and one step back. The material in the middle layer not only fully absorbs the heat emitted by the inner drum, but also absorbs the heat of the middle drum, and at the same time prolongs the drying time. time, where the material reaches the desired dry state. The material travels to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop way in the outer drum. The material that achieves the drying effect quickly travels and exits the drum under the action of hot air. The wet material that does not achieve the drying effect cannot be quickly due to its own weight. When traveling, the material is fully dried in this rectangular copy board, thereby completing the drying purpose.
We have different heat sources. For example, direct heating model hot blast stove, indirect hot blast stove, heat conduction oil, electric heating, steam, etc.
Sugarcane bagasse dryer is used for drying sugarcane bagasse, agave bagasse, sorghum bagasse, etc. to make pellet fuels or powder feeds.
1. PLC smart control & high automaticity. The performance of the rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2. High heat efficiency. The design of multiple circumferential flights combination and flow rate adjustment devices ensure the control of drying period and temperature distribution. The effect of insulation is as high as 70% and raise heat efficiency by 20%.
3. Four-wheel drive, more steady and stable.
4. Save 50% space compared with traditional dryers and reduce 50% civil investment.
5. Convenient variable frequency control systems. The customer could change the material flow rate and product moisture based on their need.
6. Environmental and safe. Modular configuration of dust collection and purification systems
7. More choice for novel air furnace with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.
| Model(JTSG) | 1406 | 1615 | 2008/3 | 2010/3 | 2210/3 | 2510/3 | 2512/3 | 2912/3 |
| Input Capacity(t/h) | 1.53 | 2.89 | 5.2 | 6.63 | 7.24 | 8.91 | 10.5 | 12.14 |
| Output Capacity(t/h) | 1.08 | 2.03 | 3.67 | 4.68 | 5.11 | 6.29 | 7.41 | 8.57 |
| Vaporization(t/h) | 0.45 | 0.85 | 1.53 | 1.95 | 2.13 | 2.62 | 3.09 | 3.57 |
| Early Moisture(%) | 40±5% | |||||||
| Final Moisture(%) | 15% | |||||||
| Drying Temperature(ºC) | 280±30ºC | |||||||
| Total Power(kw) | 34 | 45 | 78 | 90 | 105 | 125 | 140 | 155 |
| Total Weight(t) | 22 | 28 | 40 | 45 | 50 | 60 | 68 | 76 |
| Plant Area(m) | 5*15 | 6*22 | 8*16 | 8*18 | 8*20 | 10*20 | 10*24 | 10*24 |
Your device will be packed well in container and suit for long ocean shipping.
){kind=link}