Cocopeat Dryer Product Introduction
Coco peat is the coconut shell fiber powder that is a processed coconut by-product or waste. The processed coco peat is very suitable for cultivating plants and is currently a popular horticultural medium. Widely used worldwide, it is a natural and environmentally friendly product that developed countries are committed to promoting. The coco peat is compressed, the storage space is small, and it is easy to transport, which greatly reduces the cost of storage and transportation. Therefore, the market prospect of the cocoa dryer is considerable and has great demand.
Jiutian company has developed the special drying machine for cocopeat drying production line, can directly be connected with the coconut shell opening and sorting machine, coconut bran sorting, desalination, dehydration, drying, and the cocopeat drying process can be finished within 40 minutes.
Pipeline operation, labor-saving, energy-saving and environmental protection, the coconut coir and fiber quality can be guaranteed to the maximum extent, after high-temperature treatment, the coconut fiber and coir is more clean and environmental protection. This production line is the essential equipment of mechanization, scale and intensive production of coconut coir and fiber.
Coir Pith Dryer Working Principle
Coconut bran process: After desalination and dehydration, the 50-60% moisture coconut coir will be feed into the dryer and achieve flow drying, Coconut coir will be continually raised and fell by the shoveling plate inner the dryer, spiral forward, Through the inner, middle and outer three layers of the dryer, the coconut coir, and hot air will heat exchange, the dry coconut coir will be quickly moved and discharged by the wind, the wet coconut coir can't move quickly because of itself weight. The coconut coir will be fully dried inside the dryer, and the moisture will be reduced to 14-18%( can be adjusted according to customers' requirement), when finished the drying process, the coconut coir will be discharged by screw conveyor. There is a special device inside the dryer, it can prevent the uneven drying effect of the coconut coir.
Hot air process: We configure the high-efficiency energy-saving hot air furnace for our dryer, the fuel can be natural gas, diesel, coal, wood, straw, rice husk, etc. It will supply the 500-650ºC Oxygen poor hot air, after precipitation and ash removal, it will go into the dryer, then will evaporate water and dry the coconut coir, when discharged from the dryer, the hot air temperature will reduce to 50-65ºC. The wet and contain dust exhaust gas will through the professional dust collector, then can reach the discharge standard.
Coir Pith Drying Process
Performance Advantages of Coconut Bran Dryer
1. According to customer requirements, the dryer can realize intelligent control, one-button operation, automatic adjustment of operating parameters, and the dryer is always running in the best state to ensure that the moisture of the dried coconut bran is uniform and stable, which is better than traditional drying. Dryers are more energy efficient.
2. The moisture content of coconut bran is quickly dried from 65-75% to 14-18% at one time, and the temperature of coconut bran is always lower than 50 ºC. The dried coconut bran completely retains its true color, bright color and fragrant smell.
3. The internal structure of the dryer adopts a variety of high-efficiency lifting plate combination modes, which can effectively control the drying process and heat distribution, with high heat utilization rate and low exhaust gas discharge temperature.
4. Using four-wheel drive, the transmission is more stable and reliable.
5. Using variable frequency speed regulation to control the material flow, the final moisture index can be easily adjusted according to user needs.
6. The thermal efficiency of the barrel self-insulation is as high as 70% or more (the thermal efficiency of the traditional single-cylinder dryer is only 35%), and the thermal efficiency is increased by more than 30%.
7. Compared with the single-cylinder dryer, the area is reduced by about 50%, and the civil construction investment is reduced by about 50%.
8. Modular dust collection, dedusting, purification, heat recovery and utilization configuration, safe and environmentally friendly.
9. Equipped with a variety of new energy-saving clean hot blast stoves, the fuel can be diesel, gas, coal, wood blocks, sawdust, straw, etc., and it is highly efficient and energy-saving, controllable heating, easy to operate, and the energy consumption is reduced by about 30%. 20% lower operating cost.
Coir Dryer Technical Specification
| Model |
JTCG2006/3 |
JTCG2008/3 |
JTCG2010/3 |
JTCG2012/3 |
JTCG2212/3 |
JTCG2512/3 |
| Capacity(t/h) |
0.85 |
1.18 |
1.50 |
2.00 |
2.30 |
2.50 |
| Evaporation Capacity(t/h) |
0.76 |
1.05 |
1.33 |
1.77 |
2.01 |
2.25 |
| Initial Moisture(%) |
The initial is about 65-75%, the moisture is about 55% after dewatering, then feed into the dryer. |
| Final Moisture(%) |
15%(Adjustable) |
| Drying Temperature(ºC) |
280±30ºC(average temperature) |
| Total Power(kw) |
28-35 |
45-66 |
56-78 |
60-82 |
65-85 |
90-125 |
| Total Weight(kg) |
22000 |
25000 |
29000 |
32000 |
36000 |
40000 |
| Floor Space(m2) |
8m*12m |
8m*15m |
8m*18m |
8m*20m |
8m*20m |
10m*24m |
Related Cases
Company Profile
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of slime products such as coal slime, dregs, biomass, organic fertilizer, sludge, yeast, coconut fiber and chaff, and coconut. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
Related Products
RFQ
Q: What is your Business Model? Trading company or factory?
A: We are a 19 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
Q: Can I visit your factory?
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.
Q: What is the Quality of your products?
A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.
Q: How long is the Warranty of your equipment?
A: Our warranty period is one year generally.
Contact Us
If you are interested in our products, or if you have any questions, please feel free to contact us, we will give you a reply within 24 hours!
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}