| Customization: | Available |
|---|---|
| After-sales Service: | Installation, Commissioning, Technical Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The sludge belt dewatering machine is a new generation of material concentration and strong strength developed by our company on the basis of the long-term development of material mechanical dewatering equipment, aiming at the characteristics of large water content and high viscosity of sludge, and combining the technologies of many industries at home and abroad. A heavy-duty dewatering equipment integrating squeezing and dewatering. The equipment adopts the concentrated filter press horizontal split structure, and the processing capacity is relatively large. It is suitable for the rapid dehydration of large-scale sand washing plants, machine-made sand plants, mining enterprises, construction piling and other mud.
Compared with other sludge dewatering machinery, the belt press filter has the advantages of high efficiency, energy saving and continuous operation, so its application is becoming more and more extensive.
Belt type filter press the whole working process can be divided into 3 basic stages: sludge flocculation, gravity pressure filter press filter gravity dehydration, squeeze dehydration/Dewater.
1. Sludge Flocculation
Sludge dehydration before must first through the flocculation process, flocculation refers to using a flocculant (that is, a kind of polymer, polymer electrolytes) was carried out on the suspension to processing, flocculants, and sludge after mixing, the solid phase particles in the suspension system to adhesive produces condensation phenomenon and the solid phase liquid phase separation. Sludge flocculation was conducted in the flocculation reactor and sludge in the flocculation reactor residence time of about 1 to 3 min.
2. Gravity Dehydration
Approved by flocculation in the sludge moisture content 99.3% the thickener gravity dehydration, sludge moisture content up to 95-98%, in order to reduce the liquidity of sludge before squeezing, must emerge more free water and gravity dehydration zone is to implement this function, the sludge in the filter pack is not affected by the external force, the filter belt sludge load running section has an Angle, with the friction coefficient of the filter with the mud and water, mud filter belt drag line up, down, water accumulated sludge has a process, relatively extended the gravity dehydration time, out in favor of free water. Sludge through a reverse return to squeeze the filter pack, before getting into two belt clamping press, in a single filter take random operation, its role is to make the sludge evacuating, evenly distributed over the surface of the filter belt further dehydration.
3. Squeeze and Dewater
Sludge gravity dehydration, as the movement of the belt into the filter belt between the wedge pressing section, to get to the compression, dehydration, and take off a part of free water on the surface of the sludge, and then enter the consists of seven roller "S" shape of the press section, due to the sludge decreases as the filter belt between multiple sticks to the shear force produced by bending, to squeeze out internal free water.
1. It adopts advanced technology and has a good appearance. The structure has a large stiffness, steady operation, and low noise.
2. It is equipped with advanced concentration preprocessing equipment to flocculate slurry preferably and decrease running costs.
3. The gravity dewatering zone is equipped with an advanced distributor to scatter material uniformly and extend filter cloth service life. Long wedge-shaped dewatering zone and gravity dewatering zone to dehydrate material sufficiently, and make sure that material will not overflow.
4. Dewatering rollers are arranged in a scientific way. The filtrate is respectively discharged from the gravity zone, wedge-shaped zone, and squeezing zone without disturbing each other.
5. It works continuously from feeding to cake discharging. It has a high degree of automation. PLC interface can be installed as needed to realize centralized control by computer.
6. Power transmission adopts mechanical or frequency step-less speed regulation, so as to get a wide speed range and application spectrum.
7. Each belt is equipped with a pneumatic tensioning and auto rectifying system to ensure the safe operation of the filter belt.
Rubber belt: excellent flexibility and long service life.
Rubber belt support device: rubber belt adopts roller supporting and reduces moving resistance and good for prolonging the service life of the rubber belt.
Equipped with a fixed vacuum box: rubber belt moves on the box and forms the moving seal together with the box.
Cloth washing device: cleaning filter cloth.including cloth brush roller and high-pressure nozzles.
Rubber tension device: rubber tension device adjust the tension of the rubber belt by the screw, makes sure enough friction, and no-deviation running.
Cake-washing: according to the requirement of the process, it can realize the downstream washing and countercurrent washing.
Vacuum box and lift-fall device: vacuum box adopts separate sections, forming the vacuum system. It has designed a lift-fall device, convenient to replace the friction belt.
Deviation-rectifying device: adopt cylinder or air-bag to move an angle of the deviation-correcting the deviation of the filter cloth, make sure the filter cloth runs correctly.
| Model | Belt Width (mm) |
Capacity(m3) Inlet Concentration(s.s.1.5-2.5%) |
Dry Solid(kg/hr) | Cake Moisture (%) |
Power of Driving Motor(KW) | Mixing Power(KW) | Thickener Power(KW) |
| JTDW1000 | 1000 | 6.5~10.5 | 98-158 | 63-84.5 | 0.75 | 0.37 | 0.37 |
| JTDW1250 | 1250 | 7.5~12.5 | 113-188 | 0.75 | 0.37 | 0.37 | |
| JTDW1500 | 1500 | 9.5~16 | 143-240 | 0.75 | 0.55 | 0.55 | |
| JTDW1750 | 1750 | 15~24.5 | 225-368 | 0.75 | 0.55 | 0.55 | |
| JTDW2000 | 2000 | 18~30 | 270-450 | 0.75 | 0.55 | 0.55 | |
| JTDW13000 | 3000 | 40~55 | 360-675 | 1.5 | 0.55 | 0.55 |
Zhengzhou Jiutian Technology Machinery Co., Ltd. is a manufacturer specializing in developing, manufacturing, and marketing dewatering machines, drying machines, charcoal making machines, etc. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries, the sludge dehydration case was established and successfully put into operation, and the quality and technology of the dehydrator products were in line with international standards.
){kind=link}