High Quality Kitchen Waste Food Trash Dryer Rotary Drying Machine

Product Description

Food Residue Dryer

Product Introduction
  Food waste, also known as drowning water, food residues, food and kitchen residues, etc. Now people's awareness of environmental protection has increased. The disposal of food waste has always been a concern for people. The content of organic matter in food waste is high, about more than 95% of dry matter. It is easy to corrupting and stinking, and breed bacteria, causing the disease to spread. Especially in the summer, secondary pollution can easily occur during collection and transportation. However, in addition to the high content of organic matter in food and kitchen waste, it is also rich in protein, nitrogen, phosphorus, potassium, calcium, and various trace elements. It has the characteristics of complete nutrition elements and high recycling value. Jiutian Company's use of food waste as a comprehensive utilization of resources not only avoids the resource waste but also makes the resources reused and turns waste into treasure.
  Jiutian Brand three-layer single-channel food residue rotary drum dryer(patent number: ZL2009 2 0089749.2). The equipment has the advantages of large production, high efficiency, energy-saving, and small floor area. It can be used together with the clean hot air furnace and suitable for drying high moisture materials such as food residue and so on. The moisture can be dried quickly from 65-75% to 14-18% at a time, and the dry food residue completely retains its original nutritional components, with bright colors and a delicate scent. Comparing with the traditional dryer, energy consumption can be reduced by 30-50%, which can save energy and reduce the operating cost.

Product Features
1.Smart control & One-step operation. The operation parameters are under automatic control to ensure the best running condition and moisture stability of dry materials.
2.Impurities self-removal. Iron dust and other impurities are cleaned and would not enter the following process.
3. The insulation effect of the drum is as high as 70% (35% for the traditional product), raising the heat efficiency by 30%.
4.Four-wheel drive, stable and reliable.
5. Save 50% space and civil investment compared to traditional dryers.
6.Innovative flight design. Efficient flight combinations would bring better process control, thermal distribution, and heat efficiency. The temperature of exhaust gas is lower than 50ºC.
7.Convenient variable frequency control systems. Customers could change the material flow rate and product moisture based on their needs.
8.Environmental and safe. Modular configuration of dust collection and purification systems.
9.More choice for innovative air furnaces with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.

 

Working Principle
  Material Flow: the raw material with 75-85% moisture will be sent into the dewatering machine, and then the moisture will be reduced to 60-65%, then feed into the dryer by screw conveyor, concurrent flow drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle, and outer layer), heat exchange is realized between material and hot air medium. The materials that achieve the drying effect move forward fast and are discharged out of the roller. Wet materials that still don't achieve the drying effect couldn't move fast due to self-weight and are dried completely during the controlling route, thus achieving the drying effect. After the whole drying process is completed, materials are discharged by a screw conveyor. The final moisture will be reduced to 14-18% (can be adjusted according to the buyer's requirement). there is a special device inside the dryer, can prevent the unequal drying of materials.
  Air Flow: through the hot blast stove and air blower inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850ºC, then it is inhaled by the dryer-induced draft fan to dry material and evaporate water. When the temperature decreases to 55-60ºC, it is discharged out of the dryer. Wet air containing dust is discharged on standard through dust remover purifying.

Flow Chart

Technical Specifications

Specification	JTCG2006/3	JTCG2008/3	JTCG2010/3	JTCG2012/3	JTCG2212/3	JTCG2512/3
Input Capacity(t/day)	76.93	105.19	133.45	161.71	183.05	204.72
Output(t/h)	1.08-0.27	1.48-0.37	1.88-0.46	2.57-0.64	2.92-0.72	3.26-0.81
Evaporation Capacity(t/h)	0.61	0.84	1.06	1.45	1.65	1.84
Raw Material Moisture(%)	45-75%
Dried Material Moisture(%)	14-18% (Adjustable)
Drying temperature(ºC)	280±30ºC (Average temperature)
Total Power(kw)	28-35	45-66	56-78	60-82	65-85	90-125
Total Weight(kg)	19500	22000	24000	25500	27000	38000
Area	8m*12m	8m*15m	8m*18m	8m*20m	8m*20m	10m*20m
Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.

 

About Us

  Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.

  At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.
FAQ

Q: What is your Business Model? Trading company or factory?

A: We are a 15 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.

Q: Can I visit your factory?

A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train. 
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.

Q: What is the Quality of your products?

A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.

Q: How long is the Warranty of your equipment?

A: Our warranty period is one year generally.