| Customization: | Available |
|---|---|
| After-sales Service: | Installation, Commissioning, Technical Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The plate and frame filter press is a high-efficiency pressure filter device and solid-liquid separation device independently developed by Jiutian Machinery. It is a kind of space-separated solid-liquid separation device. The filter plate and the filter frame are arranged to form a filter chamber. Under the pressure of the feed pump, the feed liquid is sent to each filter chamber, and the solid and liquid are separated by filter cloth filtration. The device has greatly improved the traditional membrane filter press and has the advantages of low investment cost, high dehydration efficiency, small floor space, good treatment effect, simple operation, and maintenance, etc., and there is no need for additional secondary press pressurization equipment and press media, large compression ratio, direct force, high pressure, short working cycle, production efficiency is 3-4 times that of traditional membrane filter press, can be widely used in deep dewatering of sludge, river dredging, chemical, pharmaceutical, food, coal mine, metallurgy, and other fields.
Equipment composition
The plate and frame filter press are composed of several alternately arranged filter plates and filter frames with concave and convex patterns, mainly include the filter plate, filter frame, clamping mechanism, frame, and so on.
1. Filter plate: uneven surface, the convex portion is used to support the filter cloth, and the groove is the flow path of the filtrate. The round hole in the upper right corner of the filter plate is the filter channel; the round hole in the upper left corner is the washing channel;
2. Washing plate: the washing channel in the upper left corner communicates with the grooves on both sides to allow the washing water to flow into the groove;
3. Non-washing plate: the washing channel is not connected to the grooves on both sides;
4. Filter frame: filter channel - the round hole in the upper right corner of the filter frame; wash water channel - the round hole in the upper left corner of the filter frame.
In order to avoid the wrong order of installation of the two plates and frames, one, two, or three small buttons are often cast on the outer sides of the plates and frames, respectively. The non-washing plate is a button plate, the frame has two buttons, and the washing plate is a three-button plate.
1. Large compression ratio: The spring compression stroke of the device is large, and its compression ratio is also larger than that of the membrane filter press. Therefore, the secondary press pressure is large, the feed filtration load is reduced, and the working cycle is short.
2. The effective filtration area is large: the pressing method of the equipment is parallel extrusion, no dead angle, while the membrane filter press is semi-arc-shaped extrusion, uneven force, and has bumps, occupying an effective filtering area.
3. The pressure of the secondary press is large: the pressure of the equipment directly comes from the pressure of the hydraulic cylinder, which is direct press, and the press pressure can reach 5-7 MPa.
4. High working efficiency: The single batch working cycle of the equipment is 1.0~1.5h, and the working efficiency is 3-4 times the membrane filter press.
5. Less auxiliary equipment: This equipment uses a hydraulic system, which does not require additional pressurized equipment. The membrane filter press must be equipped with pressurizing auxiliary facilities such as a water tank, air pressure pump, press water pump, air compressor, and gas storage tank.
6. Long life of the filter plate: The filter plate of the equipment is made of steel material, which is not easy to be damaged. The service life of the filter plate is long, up to 5-8 years, and the replacement cost of the filter plate is reduced.
7. The amount of filter cloth is small: because the filter area is much smaller than the membrane filter press, the amount of filter cloth is also correspondingly much less, which can greatly reduce the replacement and maintenance cost of the filter cloth;
8. It has strong adaptability to materials. Due to the high operating pressure, the filtered slurry with small particles and high liquid viscosity can also be applied.
| Model | TCYZ-40-KS0 | TCYZ-60-KS0 | TCYZ-100-KSKS | TCYZ-150-KS | TCYZ-200-KS |
| Dry mud(T) | 0.16 | 0.24 | 0.4 | 0.6 | 0.8 |
| Capacity(moisture 80%)(t) | 0.8 | 1.2 | 2 | 3 | 4 |
| Operation cycle(min) | 80-90 | 80-90 | 80-90 | 85-95 | 90-100 |
| Filter chamber volume(m3) | 0.4 | 0.6 | 1 | 1.5 | 2 |
| Filter cake thickness(mm) | 20 | 20 | 20 | 20 | 20 |
| Filter plates number | 24 | 36 | 60 | 57 | 78 |
| Filter plate size(mm) | 1000×1000×70 | 1000×1000×70 | 1000×1000×70 | 1250×1250×70 | 1250×1250×70 |
| Weight(T) | 9.5 | 10 | 12 | 18 | 20 |
| Power(kw) | 5.5 | 5.5 | 5.5 | 7.5 | 7.5 |
| Filtration area(m2) | 40 | 60 | 100 | 150 | 200 |
| Equipment size(mm) (Without self-cleaning) |
5280×1970×1765 | 6140×1970×1765 | 7850×1970×1765 | 8070×2350×2050 | 9600×2350×2050 |
| Filter plate form | Quick open high-pressure filter frame | ||||
| Pressing pressure(MPa) | 1.6-2.0 | 1.6-2.0 | 1.6-2.0 | 1.6-2.0 | 1.6-2.0 |
| High-pressure piston pump | YBH140-10 | YBH200-19 | YBH200-19 | YBH250-25 | YBH250-30 |
| Mud plunger pump power(kW) | 5.5 | 7.5 | 7.5 | 11 | 11 |
The plate and frame filter press is suitable for sludge dewatering in wastewater treatment processes in urban sewage treatment plants, pharmaceuticals, electroplating, papermaking, leather, printing and dyeing, metallurgy, chemical industry, slaughtering, food, winemaking, and environmental protection projects. It is ideal equipment for environmental management and resource recovery.
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.
){kind=link}