Construction Using Sand Processing Machine River Sand Dryer Drying Equipment

• Customization: Available
• After-sales Service: Installation, Commissioning, Technical Training
• Warranty: 1 Year
• Model NO.: JT
• Movement Way: Agitation
• Flow: Cross Flow
• Heating Mode: Transmission
• Material Status: Powder, Bulk
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Application: Sand Drying Processing, Solid Fuels
• Power: 5.5-74kw
• Capacity: 5.4-80 T/H
• Raw Material Moisture: 15%
• Final Moisture: 1%-3%
• Material: Steel, Stainless Steel
• Raw Material: River Sand, Fly Ash, Slag
• Color: Customer′s Request
• Transport Package: Container
• Trademark: jiutian
• Origin: Henan, China
• HS Code: 8419399090
• Production Capacity: 20 Sets/Month

Product Description

 

Product Description

^{Sand dryer is also known as three layers drum dryer, three return cylinder dryers, on the basis of the single-cylinder dryer, developed and manufactured, which is an industrial dryer on non-viscous, liquid material. At present three-cylinder dryer made by Jiutian company, with mature technology, through the drying of sand, fly ash, coal, mineral materials, slag, and other material, the effect is very good.}

Working Principle

^{The sand is conveyed to the silo by belt conveyor or bucket elevator and transported to the feed end by the feeder of the silo. The inclination of the feeding pipeline should exceed the natural inclination of materials to facilitate sand flowing into the dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. Feed the material from the higher end and the heat carrier enter from the lower end, such produce adverse contact between them .sometimes, they can be fed to the cylinder together. As the cylinder runs, the sand is carried to the lower side by gravity. In the process of moving forward, the wet raw material is roasted by the heat directly or indirectly to make the raw material dry quickly, the final products discharge out by a belt conveyor or screw conveyor. There is a shoveling plate installed in the dryer with the function of shoveling the materials up and down, to enlarge the contact area between airflow and materials and enhance efficiency, and make the material run quickly. The heat carrier is hot air, the flue gas, etc. After the dryer process, It needs a cyclone dust collector to catch the items in the airflow. You should use bag type or wet-type dust collector and afterward discharge the waste gas if you intend to further reduce the dust load of the exhaust.}

 

Applications

^{Application: Sand dryer can be used for drying silica sand, river sand, fly ash, dry mixed mortar, artificial sand, frac sand, etc.}

Product Features

<sup>1. The sand dryer is made of alloy steel plate manufacturing, wear-resisting 3-4 times of ordinary steel, and the service life of the equipment is more than 10 years.
2. Material initial moisture content is 15%, and final moisture to ensure below 0.5-1%, which is the preferred product of the cement plant, GGBS, and dry mortar production line.
3. The sand dryer's thermal efficiency is as high as 80%, at the same time, the total power is low, with 40% energy saving.
4. The fuel can be adapted to coal, oil, and gas, it can be dried under 20-40mm particle material, aggregate, or powder material.
5. The sand dryer covers an area of about 40% lower than a single drum dryer and civil investment is reduced by about 50%.
6. No air leakage phenomenon solved the sealing difficulties, modular units, installation is convenient.
7. The discharge temperature is < 50 ºC, which can be directly fed libraries, without cooling.</sup>

Product Parameters

 

^Model(m)	^Output (T/h)			^Coal consumption kg/t	^Total power
	^River sand	^Fly ash	^Mineral waste residue
^Φ2.0×2	^4-5	^2-3	^3-5	^12-14	^5.5kw
^Φ2.0×4	^8-12	^4-6	^8-10	^12-14	^3kw×2
^Φ2.0×5	^12-15	^6-7	^10-13	^10-12	^4kw×2
^Φ2.2×4.5	^14-18	^7-9	^12-15	^10-12	^5.5kw×2
^Φ2.5×6	^23-28	^10-13	^20-22	^10-12	^5.5kw×4
^Φ2.8×6	^30-35	^15-18	^25-30	^10-12	^5.5kw×4
^Φ3.0×6	^35-40	^18-20	^32-35	^8-10	^7.5kw×4
^Φ3.0×7	^40-45	^20-25	^35-40	^8-10	^7.5kw×4
^Φ3.2×7	^45-50	^25-30	^40-45	^8-10	^11kw×4
^Φ3.2×8	^50-55	^30-35	^45-50	^8-10	^11kw×4
^Φ3.6×8	^60-70	^35-40	^60-65	^6-8	^15kw×4
^Φ3.8×9	^70-80	^40-45	^70-75	^6-8	^15kw×4
^Φ4.0×10	^90-100	^45-50	^80-90	^6-8	^18.5kw×4
^Φ4.2×8.5	^80-100	^45-60	^80-90	^6-8	^18.5kw×4
^(The output is set according to moisture: dry from 15% to 1-3%)

^{Price Notes: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.}

Packaging & Shipping

 

Company Profile

    ^{Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productively, profitability, and safety. Jiutian has developed more than 200 patented products for drying machine. Jiutian Machinery products include biomass drying and pelletizing production lines, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, related wood shaving machine, pellet machine, dehydration machines, carbonization furnaces, etc.}

   ^{At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. Chile, the United States, and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.}