Large Three-belt Sludge Dewatering Machine
Product Introduction
With the rapid development of industrial and urban construction, industrial wastewater and domestic sewage are increasing. In order to prevent pollution and protect the environment, sewage must be treated. In the sewage treatment, sludge with a high liquid content is produced, and the sludge treatment must first be dehydrated, otherwise, it cannot be transported and comprehensively utilized. At present, there are many sludge dewatering machines, and the belt press filter has the advantages of high efficiency, energy-saving, and continuous operation compared with other sludge dewatering machines, so its application is increasingly widespread.
The large-scale three-belt sludge dehydrator is a new generation of heavy-duty dehydrator which integrates material concentration and strong press dehydrating on the basis of our company's long-term research and development of material mechanical dehydrating equipment. The total length of the equipment is 14.2m, which adopts a concentrated pressure filter horizontal split structure. 10m long gravity concentrated section, large curved pre-pressing section, and 4 L-shaped large-diameter double-sided dewatering rollers. The treatment volume is relatively large, and it is suitable for the rapid dewatering treatment of large-scale sand washing yards, mechanism sand fields, mining enterprises, construction piling, and other muds.
Working Principle
Three-belt roller mud and water separator are composed of drive device, frame, press roller, upper filter belt, lower filter belt, filter belt tensioning device, filter belt cleaning device, discharge device, air control system, electrical control system, and so on. It is a fully automatic and efficient deep mud and water separator suitable for mud wastewater dewatering treatment in all industries. It does not need high-power motor energy consumption. It can be solidified by liquid by simple chemical reaction and physical-mechanical pressure filtration. It can complete the continuous production of mud cake with stable mechanical performance, fully automatic 24-hour continuous production operation, large processing capacity, and high output. The filter cake has a low moisture content, stable mechanical properties, easy operation, and basically no manual operation after debugging, which can save a lot of labor costs. The processed mud cake can be piled up and agglomerated, and no water is dripped during transportation. The separated water can be directly discharged or recycled.
The mud enters the dynamic (static) state mixer through the transfer pump, and is mixed with the concentration of 0.05~0.1% of the cation (positive) ion flocculant solution and fully reacted, and the tiny solid particles (or suspended matter) in the slurry are aggregated, condensed into a large volume of flocculent mass, the combined water and surface water between the materials are separated into free water. When the material is transported and spread to the filter line of the extended gravity pre-dewatering zone (or belt concentrator), under the action of gravity, free water permeates through the back of the filter to ooze and separate, forming a non-flowing mud to reach the press dewatering zone to implement greater pressure conditions. Then, with the movement of the mesh belt, it is clamped between the upper and lower two mesh belts. Through the filter belt with adjustable tensioning force, the rolling roller with gradually decreasing diameter, and the compression roller, the continuous and slow increase of roller extrusion pressure and shear force is implemented. Through the wedge zone, low-pressure zone, medium pressure zone, high-pressure zone, and strong pinch clamping zone, the water in the mud is continuously squeezed out by stepwise pressurization, and then the filter cake with lower moisture content is discharged. The scraper is scraped off, and the upper and lower filter belts are separated. The high-pressure washing water and the roller brush remove the trace particles in the pores of the surface of the filter screen and continue to the next dehydration cycle.
Characteristics
1. The dewatering effect is good, and the moisture content of the filter cake is low;
2. Low energy consumption and low-cost operation;
3. The concentrated split filter horizontal split structure has a 10 m long gravity concentration section;
4. Advanced structural design and wide application range;
5. The filter correction system is equipped with a dual photoelectric switch and double safety control device, which is sensitive and reliable, and the frequency conversion speed regulation of the filter transmission device;
6. Use high-quality materials and spare parts for processing and manufacturing;
7.24 hours of automatic continuous operation, easy operation, and maintenance;
8. Suitable for rapid dewatering of large-scale mud volume;
9. Adopt advanced frequency conversion speed regulation to effectively control the processing speed;
10. 12-roller arrangement of the extrusion section, large curved pre-pressing section, and 4 L-shaped large-diameter double-sided dewatering rollers.
Technical Parameters
| Model |
3DYQN3000ZL4 |
3DYQN3500ZL4 |
| Power(Kw) |
Host |
11 |
13 |
| Complete set |
37 |
43 |
| Belt Width(mm) |
3000 |
3500 |
| Number of mesh belts |
3 |
| Number of pairs of rolls |
1 |
| Mud capacity(m³/h) |
60~80 |
80~110 |
| Filter cake production(m³/h) |
18~25 |
25~35 |
| Filter cake moisture |
Inorganic material |
20~35% |
| Organic material |
40~60% |
| Dimension |
Length(mm) |
14200 |
14200 |
| Width(mm) |
3900 |
4400 |
| Height(mm) |
2400 |
2400 |
| Total weight(kg) |
16500 |
18200 |
Applications
The treatment capacity is relatively large, especially suitable for large mud dewatering treatment enterprises such as washing mechanism stone sand mud, sand yard wastewater sludge, construction mud, piling mud, iron ore tailings, copper mine tailings, lead and zinc mine tailings, fluorite mine tailings, bauxite mine tailings, rare earth mine tailings, dressing wastewater and so on.
About Us
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients' productivity, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine.
Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.
Audited Supplier 
){kind=link}