| Customization: | Available |
|---|---|
| After-sales Service: | Installation, Commissioning, Technical Training |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Sawdust dryer is used for pellet sawdust or powder sawdust. Wet materials are continuously sent into the drum through a screw conveyor and then get separated and pushed by the high-speed hot flow. The moisture in wet materials is taken away in this process and then we get powder or pellet dry materials.
Sawdust dryers are consist of a heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum, and discharging port.
The sawdust dryer is mainly composed of three-layer drums. The material first enters the inner layer of the rotary drum from the feeding device to achieve downstream drying. Under the inner layer of the copy board, it is continuously picked up and scattered in a spiral travel type to realize heat exchange; Then moves to the other end of the inner layer and enters the middle layer for counter-current drying. The middle layer is continuously raised repeatedly in a two-step forward and one-step travel mode; then the middle layer can fully absorb the heat emitted by the inner drum, It can absorb the heat of the middle drum, and at the same time extend the drying time, the material reaches the expected dry state here. The material travels to the other end of the middle layer and falls into the outer layer. It travels in the outer drum in a rectangular multi-loop manner. The material that achieves the drying effect quickly travels out of the drum under the action of hot air, and the wet material that does not achieve the drying effect cannot travel quickly due to its weight. , Carry out sufficient drying in this rectangular copy board, thus completing the whole drying process.
Sawdust dryer is widely used for the drying of straw briquette, charcoal, wood pellet fuel, sawdust briquette, corn straw, soybean straw, cotton stalk, wheat straw, sorghum stalk, wood shavings, sawdust, ginkgo leaf, mulberry leaves, and other fiber materials.
Biomass Drying Pellet Production line process diagram
1. PLC smart control & high automaticity. The performance of the rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2. High heat efficiency. The design of multiple circumferential flight combinations and flow rate adjustment devices ensures the control of the drying period and temperature distribution. The effect of insulation is as high as 70% and raises heat efficiency by 20%.
3. Four-wheel drive, more steady and stable.
4. Save 50% space compared with traditional dryers and reduce 50% civil investment.
5. Convenient variable frequency control systems. The customer could change the material flow rate and product moisture based on their needs.
6. Environmental and safe. Modular configuration of dust collection and purification systems
7. More choice for novel air furnaces with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.
| Model(JTJG) | 1409 | 1615 | 2008/3 | 2010/3 | 2210/3 | 2510/3 | 2512/3 | 2912/3 |
| Input Capacity(t/h) | 1.53 | 2.89 | 5.2 | 6.63 | 7.24 | 8.91 | 10.5 | 12.14 |
| Output Capacity(t/h) | 1.08 | 2.03 | 3.67 | 4.68 | 5.11 | 6.29 | 7.41 | 8.57 |
| Vaporization(t/h) | 0.45 | 0.85 | 1.53 | 1.95 | 2.13 | 2.62 | 3.09 | 3.57 |
| Early Moisture(%) | 40±5% | |||||||
| Final Moisture(%) | 15%(adjustable) | |||||||
| Drying Temperature(ºC) | 280±30ºC | |||||||
| Total Power(KW) | 34 | 45 | 78 | 90 | 105 | 125 | 140 | 155 |
| Total Weight(T) | 22 | 28 | 40 | 45 | 50 | 60 | 68 | 76 |
| Plant Area(m) | 5*15 | 6*22 | 8*16 | 8*18 | 8*20 | 10*20 | 10*24 | 10*24 |
| Except for the above models, we can also supply special models according to your requirements. | ||||||||
Your device will be packed well in container and suit for long ocean shipping.
){kind=link}