| After-sales Service: | Installation, Commissioning, Technical Training |
|---|---|
| Warranty: | 1 Year |
| Movement Way: | Agitation |
| Flow: | Cross Flow |
| Heating Mode: | Transmission |
| Material Status: | Powder, Bulk |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Bean dregs dryer product introduction
Bean dregs, the by-product of producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs' water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs' crude protein content is three times higher than that of the unhulled rice. It is suitable for nutrition feed for pig, chicken, duck, etc.
Bean dregs dryer mainly consists of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader, and power distribution cabinet. After a certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through the material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatter evenly and contacts with hot air sufficiently in the drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.
Our company's products have been successfully exported to Vietnam, Zimbabwe, Uzbekistan, Uganda, Philippines, Thailand, South Africa, Russia, Poland, Nigeria, Mexico, India and other countries and regions, and have been highly recognized by customers.
1. Can achieve intelligent control, one-button operation, automatic adjustment of operating parameters, the dryer is always in the best condition to run, to ensure that the drying of the material moisture uniform and stable, bright colors, nutrients remain unchanged.
2. Built-in mixing blade device will be fully stirred and broken material, material, and hot temperament heat exchange fully, the equipment unit capacity increased by 50 %, fuel energy consumption reduced by 30% ;
3. Equipment with less malfunction, low maintenance costs, low energy consumption;
4. Drying products are powder, water evenly, bright color, drying process does not lose the material nutrients;
5. Starch residue drying production line using a special scattering and crushing device to ensure a good dryer drying effect.
6. Adopts a unique sealed insulation device, effectively reducing the heat loss of the drying system;
7. The system sealing performance is good, and with a complete dust removal device, no dust spill, the operating environment is good;
8. The entire drying system using electrical centralized control, hot air temperature with automatic adjustment, a high degree of automation, easy to operate;
9. After the drying process, it can be equipped with crushing, mixing, granulation, packing, and other follow-up section to produce potato residue pellet feed products.
Working Principle of Bean Dregs Dryer
The three-layer dispersing drum dryer is used for drying and dehydration. The high-humidity bean dregs are sent into the drum by the screw conveyor, and are continuously picked up and scattered under the copying plate to advance in a spiral manner. The built-in stirring blade device fully stirs the material. Disperse and crush, and fully expand the heat exchange area between the material and the hot gas, so as to solve the problem of sticking to the wall. At the same time, the drum dryer is equipped with a shock cleaning device to prevent the material from sticking to the cylinder wall. The material curtain is uniform and the heating area is large. , the pass rate is high, and the occurrence of paste is largely avoided.
The bean dregs can reach a water content of about 35% in the stirring drum dryer and are discharged by the screw conveyor, and then enter the special pulverizer for semi-wet materials. , The dry powder is recovered by the cyclone discharger and the pulse bag filter, and the exhaust gas is discharged up to the standard to complete the entire drying process.
Bean Residue Dryer Application: Widely used for drying bean dregs, brewer grains, potato residue, sweet potato dregs, cassava pulp, tapioca slag, etc.
| Model(JTJG) | 1208 | 1408 | 1610 | 2010 | 2010/3 | 2210/3 | 2510/3 | 2512/3 |
| Input Capacity(t/h) | 1.82 | 2.18 | 3.15 | 3.81 | 4.76 | 5.51 | 6.33 | 7.60 |
| Output Capacity(t/h) | 1.07 | 1.28 | 1.85 | 2.24 | 2.80 | 3.24 | 3.72 | 4.47 |
| Vaporization(t/h) | 0.75 | 0.9 | 1.30 | 1.57 | 1.96 | 2.27 | 2.61 | 3.13 |
| Early Moisture(%) | 50±5% | |||||||
| Final Moisture(%) | 15%(adjustable) | |||||||
| Drying Temperature(ºC) | 350±30 | |||||||
| Total Power(KW) | 32 | 40 | 55 | 95 | 95 | 100 | 125 | 145 |
| Total Weight(T) | 15 | 17 | 21.5 | 26.5 | 26.5 | 28.5 | 37 | 41 |
| Plant Area(m) | 5*15 | 5*15 | 6*16 | 8*18 | 8*20 | 8*20 | 10*20 | 10*22 |
| Except for the above models, we also supply the special models according to your requirements. | ||||||||
Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine.
Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.
At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Cte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka, Chile, the United States, and other countries have established a case of dryers and successfully put into production, to achieve the quality and technology of dryer products and international standards.
Q: What is your Business Model? Trading company or factory?
A: We are a 19 years factory, all our machinery is manufactured by ourselves, factory direct sales, product quality, and after-sales service can be guaranteed.
A: Yes. Many domestic and international customers visit our factory every year. Our company is located in Zhengzhou Henan province, China, you can come here by air or train.
The nearest airport is Zhengzhou Xinzheng International Airport, and the Airport Code is CGO.
We will pick you up at the airport. Welcome to visit our factory.
A: Zhengzhou Jiutian products come with the best quality, and our products passed CE certification, exported to lots countries around the world, such as Australia, Malaysia, India, Italy, Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured of the quality absolutely.
A: Our warranty period is one year generally.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}