Hot Selling Plating Industrial Sludge Sewage Treatment Dryer Plant

• Customization: Available
• After-sales Service: Installation, Commissioning, Technical Training
• Warranty: 1 Year
• Model NO.: DHM
• Flow: Cross Flow
• Heating Mode: Convective
• Material Status: Powder, Strap, Bulk
• Drying Medium: Air
• Operational Method: Continuous
• Type: Continuous Vacuum
• Dry Area(M2): 5~256
• Capacity(Water Kg/D): 50~7168
• Power(Kw): 3~180
• Volume(M3): 0.08-28.4
• Dimension(mm): 3700*600*980-9100*3700*3300
• Spindle Speed (R P M): 10~30
• Innitial Moisture(%): 80~85
• Final Moisture(%): 30~40
• Steam Pressure(MPa): 0.4~0.6
• Heating Temperature: >150
• Transport Package: Container
• Specification: 22t-76t
• Trademark: Jiutian
• Origin: Henan, China
• Production Capacity: 20 Sets/Month

Product Description

Sludge Dryer Product Introduction

  With the acceleration of social and economic development and urbanization, the amount of sewage sludge in urban areas is increasing. Like domestic garbage, if it cannot be disposed of safely, it will seriously affect the living environment. The effective means of sewage treatment is to press and dewater the sewage and then dry the sludge. The volume of the dried sludge can be reduced by 4 to 5 times. The product is odorless and free of pathogens. It can be used as fertilizer, soil improver and substitute energy, etc.

  According to the characteristics of sludge treatment at present, Jiutian Machinery has carried out a series of technical breakthroughs and practices, and carefully developed a horizontal stirring continuous drying equipment with steam as heat transfer medium and heat conduction as the main part. Because the agitating blade is shaped like a paddle, it is called a paddle dryer. The product can indirectly heat or cool the paste, granular, powder, and slurry materials, and can complete unit operations such as drying, cooling, heating, sterilization, reaction, and low-temperature combustion. The special wedge-type stirring heat transfer blades in the equipment have high heat transfer efficiency and self-cleaning function of the heat transfer surface.
 

Sludge Drying Machine Working Principle

  The paddle dryer is compact in structure and mainly consists of a sandwich casing, a central shaft with staggered blades, inlet and outlet joints, drive mechanisms, control boxes, and other components.

  The cylinder is a jacket structure in which hot steam circulates inside. During operation, water vapor is introduced into the jacket, hollow shaft, and blade to provide the heat required for drying; a very small amount of air is introduced into the dryer and used as a carrier for the steam (or organic steam) that evaporates during drying; the material enters the machine from the feed port, and is conveyed by the hollow blade to the discharge port for discharging. The material is heated and evaporated by the hollow blade and the jacket during the conveying process to be dried. The heat transfer surface of the wedge blade has a self-cleaning function. The relative motion between the particles and the wedge surface produces a washing effect that washes away the adhering material on the surface of the blade, which allows the material to have a long residence time and a high fill factor.
 

Sludge Dryers Characteristics

  1. High thermal efficiency and low energy consumption: due to indirect heating, there is not a large amount of air carrying heat, and the outside of the dryer is provided with an insulating layer. For the slurry material, the amount of steam required to evaporate per unit mass of water is small;
  2. Low equipment input cost: there is a huge heat transfer surface in the effective volume of the unit, which shortens the processing time and reduces the size of the equipment. Small space requirements for the site;
  3. A wide range of applicable materials: applicable to different heat media, can handle both heat-sensitive materials and materials requiring high-temperature treatment. Commonly used media are water vapor, heat transfer oil, hot water, cooling water, and the like. It can be operated continuously or intermittently and can be applied in many fields;
  4. The environmental pollution is small: the amount of air used is small, and the amount of dust material is less. Closed-loop can be used for contaminated materials or for solvent recovery;
  5. Low operating cost: fully enclosed independent operation structure. The amount of wear is small and the maintenance cost is low;
  6. Stable operation: Due to the special compression expansion and agitation of the wedge-shaped blades, the material particles are fully in contact with the heat transfer surface. In the axial interval, the temperature, humidity, and mixing gradient of the material are small, thus ensuring process stability.
 

Using Conditions

  1. Ambient temperature: -10 ° C ~ +40 ° C

  2. Power supply: 380V 50HZ
  3. Heating method: steam
  4. Heating temperature: ≥150°C
  5. Steam pressure: ≥0.4~0.6Mpa
  6. Initial moisture: 80~85% Final moisture: ≤30~40% (overall weight loss is more than 50%)
  7. Equipment material: carbon steel (sludge removal part can be customized stainless steel)
  8. Installation environment: indoor
  9. This equipment is suitable for drying all sludge except oily sludge (oil content ≤10%)
 

Technical Parameters

Model	Dry area(m²)	Capacity(Water·kg/D)	Power(kw)	Volume(m³)	Dimension L*W*D(mm)	Spindle speed (r·p·m)
DHM-5	5	50~140	3	0.08	3700*600*980	10~30
DHM-10	10	100~280	4	0.40	3800*800*1200
DHM-18	18	180~504	7.5	1.09	4000*1200*1600
DHM-29	29	290~812	11	1.85	5600*1500*1800
DHM-36	36	360~1008	30	2.42	6000*1500*1800
DHM-41	41	410~1148	37	2.80	6000*1600*1800
DHM-50	50	500~1400	45	3.57	6200*1700*2300
DHM-87	87	870~2436	55	7.39	6700*2400*2600
DHM-128	128	1280~3584	90	12.0	7500*3300*2700
DHM-256	256	2560~7168	180	28.4	9100*3700*3300
Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals.

Applications

Petrochemical industry: polyolefin powder, polycarbonate resin, high and low-density polyethylene, linear low-density polyethylene, polyacetal granules, nylon 6, nylon 66, nylon 12, acetate, polyphenylene sulfide, propylene base resin, polypropylene, engineering plastics, polyvinyl chloride, polyvinyl alcohol, polystyrene, polyester, polyoxymethylene, styrene-acrylonitrile copolymerization, ethylene-propylene copolymerization.

Environmental protection industry: sludge, electroplating sewage sludge, boiler soot, sugar factory waste residue, pharmaceutical factory waste residue, MSG factory waste residue, coal ash.

Feed industry: soy sauce residue, bone-based feed, distiller's grains, food scraps, apple pomace, orange peel, soybean meal, chicken bone feed, fish meal, feed additives, bio-sludge.

Food industry: starch, cocoa beans, corn kernels, salt, modified starch, medicines.

Chemical industry: soda ash, NPK compound fertilizer, kaolin, bentonite, white carbon black, carbon black, phosphogypsum, calcium sulfate, calcium nitrate, magnesium carbonate, sodium cyanide, oxidized sodium fluoride, aluminum hydroxide, barium sulfate, calcium carbonate, molecular sieves, dyes, saponins.

About Us

     Founded in 2003, Zhengzhou Jiutian is an enterprise with 200 employees committed to enhancing clients productively, profitability, and safety. Jiutian has developed more than 200 patented products for the drying machine. Jiutian Machinery products include biomass drying and pelletizing production line, feed dregs drying equipment, coal drying upgrading equipment, poultry manure drying equipment, coconut fiber, and coir drying machine, and related wood shaving machine, pellet machine, dehydration machine, carbonization furnace, etc.

   At present, Jiutian not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia, Sri Lanka. In Chile, the United States and other countries have established a case of dryers and successfully put them into production, to achieve the quality and technology of dryer products and international standards.