| After-sales Service: | Installation, Commissioning, Technical Training |
|---|---|
| Warranty: | 1 Year |
| Movement Way: | Agitation |
| Atomization: | Rotary Atomization |
| Flow: | Cross Flow |
| Heating Mode: | Transmission |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Crops straw dryer is applied for drying barley straw, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, beanstalks ( including materials like soybean straw, broad bean straw, pea straw, cowpea straw, lupine straw, peanut vine, etc.) According to the characteristic, production capacity, applying requirement, cost control, operating convenience of each biomass material, our company optimizes the drying technology.
This equipment is of a huge production, high efficiency, and energy saving, small floor space. Compared with common dryer machines, it saves energy by 30%-50%, thus saving energy and drying cost to the maximum.
The straw is first entered into the inner layer of the rotary drum from the feeding device to achieve downstream drying. The straw is continuously picked up and scattered under the inner layer of the copy board to achieve heat exchange; then move to the other end of the inner layer to enter The middle layer is dried in countercurrent, and it is continuously raised in the middle layer, showing a two-step forward and one-step travel mode; then in the middle layer, it can not only fully absorb the heat emitted by the inner drum, but also absorb the heat of the middle drum, and at the same time The drying time is extended again, and the straw reaches the expected dry state here. The straw travels to the other end of the middle layer and falls into the outer layer. It travels in a rectangular multi-loop manner in the outer drum. The dried straw travels quickly and exits the drum under the action of hot air. The wet straw that does not reach the drying effect cannot travel quickly due to its own weight. , Carry out sufficient drying in this rectangular copy board, thus completing the whole drying process.
1. PLC smart control & high automaticity. The performance of the rotary dryer and moisture content of dry materials is automatically controlled in stable states.
2. High heat efficiency. The design of multiple circumferential flight combinations and flow rate adjustment devices ensure the control of the drying period and temperature distribution. The effect of insulation is as high as 70% and raise heat efficiency by 20%.
3. Four-wheel drive, more steady and stable.
4. Save 50% space compared with traditional dryers and reduce 50% civil investment.
5. Convenient variable frequency control systems. The customer could change the material flow rate and product moisture based on their needs.
6. Environmental and safe. Modular configuration of dust collection and purification systems
7. More choice for novel air furnaces with high efficiency, convenient manipulation, and energy control, which could reduce 30% energy cost and 20% electric cost.
| Model(JTJG) | 1409 | 1615 | 2008/3 | 2010/3 | 2210/3 | 2510/3 | 2512/3 | 2912/3 |
| Input Capacity(t/h) | 1.53 | 2.89 | 5.2 | 6.63 | 7.24 | 8.91 | 10.5 | 12.14 |
| Output Capacity(t/h) | 1.08 | 2.03 | 3.67 | 4.68 | 5.11 | 6.29 | 7.41 | 8.57 |
| Vaporization(t/h) | 0.45 | 0.85 | 1.53 | 1.95 | 2.13 | 2.62 | 3.09 | 3.57 |
| Early Moisture(%) | 40±5% | |||||||
| Final Moisture(%) | 15%(adjustable) | |||||||
| Drying Temperature(ºC) | 280±30ºC | |||||||
| Total Power(KW) | 34 | 45 | 78 | 90 | 105 | 125 | 140 | 155 |
| Total Weight(T) | 22 | 28 | 40 | 45 | 50 | 60 | 68 | 76 |
| Plant Area(m) | 5*15 | 6*22 | 8*16 | 8*18 | 8*20 | 10*20 | 10*24 | 10*24 |
| Except for the above models, we can also supply special models according to your requirements. | ||||||||
Your device will be packed well in a container and suit for long ocean shipping.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}