| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The flash dryer is a new type of continuous drying equipment integrating drying, crushing and screening. It is especially suitable for drying filter cake, paste and thin slurry materials. The drying time of the wet material in the drying tower is only 5-8 seconds, and the water evaporates instantly. The quality of the dried product has a lot to do with the drying temperature, wind speed, air volume, and crushing speed. The hot air enters the annulus at the bottom of the drying chamber from the inlet pipe in a tangential direction and rises spirally. At the same time, the material is quantitatively fed into the tower from the feeder and fully exchanges heat with the hot air. Under the action, it is mechanically crushed, and the materials with low moisture content and small particle size rise together with the rotating air flow, and are transported to the separator for gas-solid separation, and the finished product is collected and packaged, while the tail gas is treated by the dust removal device and then emptied.
The cyclone flash dryer is composed of a drying host, a feeder, a heat source device (hot stove or steam), an air filter, a blower, a cyclone separator, a bag filter, an induced draft fan, and other key components.
The hot air enters the bottom of the dryer tangentially and is driven by the agitator to form a powerful rotating wind field. Paste material enters the dryer from the screw feeder. Under the strong action of the high-speed rotating stirring blade, the material is dispersed under the action of impact, friction, and shearing force. The block material is quickly crushed, fully contacted with hot air, and heated. , dry. The dried material after dehydration rises with the hot airflow, the grading ring traps large particles, and the small particles are discharged out of the dryer from the center of the ring and recovered by the cyclone separator and dust collector. The incomplete or large materials are thrown to the wall by centrifugal force. , And fall to the bottom to be crushed and dried.
1. The circumferential gas velocity in the drying chamber is high, and the material residence time is short, which can effectively prevent the material from sticking to the wall and heat-sensitive material from deteriorating, and can be dried into a uniform powder product at one time, eliminating the need for crushing, screening and other processes.
2. The drying chamber is equipped with a grading ring and a swirl sheet, and the fineness of the material and the final moisture can be adjusted. The special air distribution device reduces the resistance of the equipment and effectively improves the drying uniformity of the material.
3. The bottom of the dryer is equipped with a special cooling device and an air pressure seal to avoid the deterioration of the material in the high temperature area at the bottom.
4. It can effectively control the final moisture content and fineness. By adjusting the feeding, hot air temperature and classifier, the moisture content and fineness of the product can be guaranteed to be uniform.
Foodstuffs: soy protein, gelatinized starch, wine trough, wheat sugar, wheat starch, etc.
Organics: Atrazine (pesticide pesticides), lauric acid, benzoic acid, benzoic acid, bactericidal dan, sodium oxalate, cellulose acetate, organic pigments, and the like.
Dyes: antimony, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various nitrogen dye intermediates.
Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, and the like.
| Model | Inner Diameter(mm) | Air Volume(m³/h) | Evaporation Capacity(kg/h) | Total Power(kW) | Max Height(m) | Covering Area (m²) |
| XSG-2 | 200 | 350-500 | 12-17 | 10 | 4 | 15 |
| XSG-4 | 400 | 1150-2000 | 40-70 | 20 | 4.8 | 20 |
| XSG-6 | 600 | 2450-4500 | 80-150 | 40 | 5.8 | 28 |
| XSG-8 | 800 | 4450-7550 | 150-250 | 65 | 6.5 | 35 |
| XSG-10 | 1000 | 7000-12500 | 230-425 | 85 | 7.1 | 40 |
| XSG-12 | 1200 | 10000-20000 | 300-600 | 105 | 7.8 | 52 |
| XSG-16 | 1600 | 18000-36000 | 600-1000 | 150 | 8.8 | 80 |
| XSG-20 | 2000 | 28200-56500 | 1000-1500 | 230 | 10.1 | 150 |
| Note: The price above is just for reference, please feel free to contact us if you want to know more about different models or production lines. We can offer free customized proposals. | ||||||
Zhengzhou Jiutian Machinery Equipment Co., Ltd. is a comprehensive scientific and technological innovation private enterprise integrating scientific research, development, production, sales, and service. Our company is committed to the research and development and production of a series of technical products such as kitchen waste treatment equipment, coal (mud) upgrading equipment, feed dehydration drying equipment, biomass pellet fuel production line, etc. It involves the optimization of treatment projects for the reuse of kitchen waste, the recycling of resources in the field of the circular economy, clean energy, and environmental protection projects, the conversion of waste by-products such as waste residue and waste yeast into feed projects, coal chemical industry such as coal slime and coal mine. The coal refining by-products are transformed into power plant combustion raw materials projects and the recycling of wood chips and sawdust resources into biomass energy projects.
If you are interested in Spin Flash Dryer, or if you have any questions, please feel free to contact us, we will reply to you within 24 hours!
){kind=link}