| After-sales Service: | Provide |
|---|---|
| Movement Way: | Agitation |
| Flow: | Cross Flow |
| Heating Mode: | Transmission |
| Material Status: | Powder, Bulk |
| Drying Medium: | Air |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Red mud dryer is also known as the three layers of drum dryer, three return cylinder dryer, on the basis of the single cylinder dryer, developed and manfactured,which is an industrial dryer on non-viscous, liquid material .At present three-cylinder dryer made by Dingli company,with mature technology, throughthe drying of the sand, fly ash, coal, mineral materials, slag and other material , the effect is very good.
1. The red mud dryer is made of alloy steel plate manufacturing,the wear-resisting 3-4 times of ordinary steel , the service life of the equipment is more than 10 years.
After the red mud enters the drying drum, it is divided into the following working areas: One is the guide area. The red mud enters this area and quickly evaporates water in contact with the high temperature hot air. The red mud does not form a bond under the movement of the guide plate with a large lead angle. Then it is led to the next lower production area: the second is the pick-up cleaning area, where the wet material is picked up by the pick-up board to form a material curtain. When the red mud falls, it is easy to form a sticking drum wall phenomenon. In this area, due to the equipment design The cleaning device, the cleaning device cleans the red mud adhered to the inner wall very reasonably. In this process, the cleaning device also breaks the agglomeration of the red mud balls, thereby increasing the heat exchange area and increasing the drying rate: It is an inclined lifting plate area, where the wet red mud is already in a low-moisture and loose state, and the red mud has no adhesion phenomenon in this area. After sufficient heat exchange, the red mud reaches the required moisture state and enters the discharge area : The fourth is the discharging area. The drum is not equipped with a copy board in this area. The red mud rolls and slides to the discharge port in this area to complete the entire drying process.
Dryers are widely used in building materials, metallurgy, mineral processing, chemical, cement and other industries. They can be used to dry slag, calcium carbide slag, limestone, clay, river sand, quartz sand, water slag and other materials.
| Model(m) | Output (T/h) | Coal consumption kg/t | Total power | ||
| River sand | Fly ash | Mineral waste residue | |||
| Φ2.0×2 | 4-5 | 2-3 | 3-5 | 12-14 | 5.5kw |
| Φ2.0×4 | 8-12 | 4-6 | 8-10 | 12-14 | 3kw×2 |
| Φ2.0×5 | 12-15 | 6-7 | 10-13 | 10-12 | 4kw×2 |
| Φ2.2×4.5 | 14-18 | 7-9 | 12-15 | 10-12 | 5.5kw×2 |
| Φ2.5×6 | 23-28 | 10-13 | 20-22 | 10-12 | 5.5kw×4 |
| Φ2.8×6 | 30-35 | 15-18 | 25-30 | 10-12 | 5.5kw×4 |
| Φ3.0×6 | 35-40 | 18-20 | 32-35 | 8-10 | 7.5kw×4 |
| Φ3.0×7 | 40-45 | 20-25 | 35-40 | 8-10 | 7.5kw×4 |
| Φ3.2×7 | 45-50 | 25-30 | 40-45 | 8-10 | 11kw×4 |
| Φ3.2×8 | 50-55 | 30-35 | 45-50 | 8-10 | 11kw×4 |
| Φ3.6×8 | 60-70 | 35-40 | 60-65 | 6-8 | 15kw×4 |
| Φ3.8×9 | 70-80 | 40-45 | 70-75 | 6-8 | 15kw×4 |
| Φ4.0×10 | 90-100 | 45-50 | 80-90 | 6-8 | 18.5kw×4 |
| Φ4.2×8.5 | 80-100 | 45-60 | 80-90 | 6-8 | 18.5kw×4 |
| (The output is set according to moisture: dry from 15% to 1-3%) | |||||
The sand dryer ordered by Hunan customers applies Jiutian's newly developed drying technology. At the same time, it combines the characteristics of sand with special equipment to dry the sand to the customer's demand.
Zhengzhou Jiutian Machinery Equipment Co., Ltd. dryer products cover all kinds of slime products such as coal slime, dregs, biomass, organic fertilizer, sludge, yeast, coconut fiber and chaff, and coconut. At present, the company not only has a huge customer resource system and considerable market share in the country but also in the UK, Russia, Greece, Italy, Israel, Morocco, Congo, Egypt, Côte d'Ivoire, Madagascar, Australia, India, Vietnam, Laos, Indonesia, Malaysia. In many overseas countries such as Sri Lanka, Chile, and the United States, the dryer case was established and successfully put into operation, and the quality and technology of the dryer products were in line with international standards.
Q1. Quality control
All the sand drying equipment offered by Zhengzhou Jiutian Technology Machinery Co., Ltd. are produced by China national standard drawings, nonstandard equipment will be produced by the drawings confirmed by clients. Zhengzhou Jiutian strictly follows ISO9001, SGS Quality management system. Most equipment will be tested for at least 8 hours in the factory before delivery. There is a record in the computer for each equipment, spares can be easily confirmed when it is necessary.
Q2. Way of payment
Zhengzhou Jiutian offers various ways of payment, T/T, L/C, West Union, etc. All can be negotiated.
Q3. Delivery time
Normal delivery time within 45 days, complete production line or larger equipment may take longer. Exact delivery shall be confirmed when placing the order.
Q4. Shipping lines
Priority rule based on clients' request, and freight cost, service, shipping date, date of arrival shall be considered.
Q5. Installation
Jiutian has several experienced technicians with passports ready to go for installation when installation service is needed.
Q6. Equipment warranty
The sand drying equipment from Zhengzhou Jiutian Technology Machinery Co., Ltd. with 12 months warranty.
Q7. What is the heat source of your stove?
Coal, wood, rice husk, or diesel, or natural gas. And our company is developing a gas stove.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}